Seeed Studio Amazing Hand — 8-DOF Open-Source Robotic Hand Kit with Feetech Servos (Right / Left)

Seeed Studio Amazing Hand — 8-DOF Open-Source Robotic Hand Kit with Feetech Servos (Right / Left)

Right hand
$140.00
Reapris  $140.00 Ordinarie pris 
Hoppa till produktinformation
Seeed Studio Amazing Hand — 8-DOF Open-Source Robotic Hand Kit with Feetech Servos (Right / Left)

Seeed Studio Amazing Hand — 8-DOF Open-Source Robotic Hand Kit with Feetech Servos (Right / Left)

SEEED-100063642
$140.00
inkl. moms
$112.00 exkl. moms
Hand

Fri frakt inom Sverige från 470 kr

Under 470 kr: 65 kr. Övriga EU från 229 kr, beroende på vikt. Alla paket skickas spårbart.

Förbeställning. Varan finns inte i lager ännu. Beställ nu så skickar vi den så snart den har kommit in till oss.

Behöver du fler?

Volympris för skolor och företag

Få en offert med pris och leveranstid för större antal.

Begär offert

För skolor, företag, föreningar och projektbeställningar.

A four-finger robotic hand developed by Pollen Robotics as an open-source design, sold as a build-it-yourself kit. Each finger has two phalanges driven by two small serial bus servos in a parallel mechanism, so the hand can both bend and spread its fingers. The rigid parts are 3D-printable and covered by flexible shells, which makes it practical for grasping experiments, teleoperation and imitation-learning projects, for example mounted on a robot arm. The included driver board is made for a Seeed Studio XIAO; it can also be controlled from a Raspberry Pi, NVIDIA Jetson or another microcontroller over UART.

Specifications

  • Fingers: 4, each with 2 articulated phalanges
  • Degrees of freedom: 8 (flexion/extension and abduction/adduction)
  • Actuators: 8 × Feetech SCS0009 serial bus servos (UART, 5 V, 1.89 kg·cm rated torque)
  • Controller: servo driver board for Seeed Studio XIAO (XIAO not included); also usable with Raspberry Pi, Jetson or an MCU
  • Structure: black ABS frames with flexible shells
  • Weight: 400 g without servos
  • Operating temperature: 0–40 °C
  • Manufacturer part numbers: 100063642 (right hand), 100062181 (left hand)

In the box

  • 1 × servo driver board (XIAO-compatible)
  • 8 × Feetech SCS0009 servos, 8 × 3-pin breakout boards, 8 × 150 mm 3-pin cables
  • 1 × 12 V 3 A power adapter (5.5 × 2.5 mm) and 1 × DC pigtail cable
  • Full structural kit: fingers, palm, wrist shells and frames
  • 16 × ball linkage rods, stainless steel pins, screws, lock nuts and washers
  • Phillips screwdriver and decorative stickers

Supplied as a kit for self-assembly.

Shipping

Pre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.

Du kanske också gillar