{"title":"Robotics","description":"\u003cp\u003eAll our robots and robotics parts in one place: humanoid and legged robots, robot arms, mobile robots and rovers, servos and motors.\u003c\/p\u003e","products":[{"product_id":"seeed-studio-grove-ultrasonic-distance-sensor","title":"Seeed Studio Grove Ultrasonic Distance Sensor","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eUltrasonic distance sensor for measuring the distance to objects without contact. A common part in robots and obstacle detection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltrasonic transmitter and receiver on one module\u003c\/li\u003e\n\u003cli\u003eUses a single signal pin\u003c\/li\u003e\n\u003cli\u003eGrove connector, 3.3 V and 5 V compatible\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55220959379783,"sku":"SEEED-101020010","price":89.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/grove---ultrasonic-distance-sensor-preview_1.png?v=1790790901"},{"product_id":"seeed-studio-grove-time-of-flight-distance-sensor-vl53l0x","title":"Seeed Studio Grove Time of Flight Distance Sensor (VL53L0X)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eLaser distance sensor built on the ST VL53L0X. It measures distance by the time of flight of a laser pulse, which gives a reading that does not depend on the colour of the target.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eST VL53L0X time-of-flight sensor\u003c\/li\u003e\n\u003cli\u003eRange up to about 2 m\u003c\/li\u003e\n\u003cli\u003eI2C over a Grove connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55220959412551,"sku":"SEEED-101020532","price":159.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/httpsstatics3.seeedstudio.comseeedfile2018-07bazaar880301_1233.jpg?v=1790790902"},{"product_id":"seeed-studio-grove-servo","title":"Seeed Studio Grove Servo","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eSmall hobby servo with a Grove connector, so it plugs straight into a Grove shield without extra wiring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePositional servo with about 180 degrees of travel\u003c\/li\u003e\n\u003cli\u003eGrove connector\u003c\/li\u003e\n\u003cli\u003eServo horns included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55220979564871,"sku":"SEEED-316010005","price":139.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/httpsstatics3.seeedstudio.comproductgroveservo_01.jpg?v=1791991164"},{"product_id":"seeed-studio-grove-16-channel-pwm-driver-pca9685","title":"Seeed Studio Grove 16-Channel PWM Driver (PCA9685)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003ePWM driver that controls up to 16 servos or LED channels over I2C. Useful for robot arms, walkers and other builds with many servos.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNXP PCA9685, 16 channels with 12-bit resolution\u003c\/li\u003e\n\u003cli\u003eI2C over a Grove connector\u003c\/li\u003e\n\u003cli\u003eTerminal for external servo power\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55220979597639,"sku":"SEEED-108020102","price":279.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995130_perspective.jpg?v=1790790946"},{"product_id":"seeed-studio-grove-i2c-motor-driver-tb6612fng","title":"Seeed Studio Grove I2C Motor Driver (TB6612FNG)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eMotor driver built on the Toshiba TB6612FNG, controlled over I2C. Drives two DC motors or one stepper motor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eToshiba TB6612FNG dual H-bridge\u003c\/li\u003e\n\u003cli\u003eTwo DC motors or one stepper motor\u003c\/li\u003e\n\u003cli\u003eI2C over a Grove connector\u003c\/li\u003e\n\u003cli\u003eScrew terminals for motors and external motor power\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55220979663175,"sku":"SEEED-108020103","price":219.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/httpsstatics3.seeedstudio.comseeedfile2018-11bazaar995164_perspective.jpg?v=1790790947"},{"product_id":"seeed-studio-so-arm101-pro-servo-motor-kit-6-dof-leader-follower-arm-for-hugging-face-lerobot","title":"Seeed Studio SO-ARM101 Pro Servo Motor Kit — 6-DOF Leader\/Follower Arm for Hugging Face LeRobot","description":"\u003cp\u003eThe motor and electronics kit for the open-source SO-ARM101 (SO-101) arm pair used with Hugging Face LeRobot. You build a leader arm that you move by hand and a follower arm that copies it, record demonstrations, and train imitation-learning policies on a PC or Jetson.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e 3D-printed arm parts (print them yourself from the open-source files), camera and power supplies.\u003c\/p\u003e\u003ch3\u003eKit contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12 × Feetech STS3215 serial bus servos with 12-bit magnetic encoders\u003c\/li\u003e\n\u003cli\u003eLeader arm (7.4 V): 1 × 1:345, 2 × 1:191, 3 × 1:147 gear ratio\u003c\/li\u003e\n\u003cli\u003eFollower arm (12 V): 6 × 1:345 gear ratio\u003c\/li\u003e\n\u003cli\u003e2 × servo adapter boards for Seeed XIAO\u003c\/li\u003e\n\u003cli\u003e2 × USB-C cables, 2 × DC pigtail cables, multi-head 5 V and 12 V power cables\u003c\/li\u003e\n\u003cli\u003e8 × studs and 8 × screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDegrees of freedom: 6 per arm (5 joints + gripper)\u003c\/li\u003e\n\u003cli\u003eCommunication: UART serial bus, controlled from a PC over USB\u003c\/li\u003e\n\u003cli\u003ePower required: 12 V 2 A DC (follower) and 5 V 4 A DC (leader), 5.5 × 2.1 mm barrel\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 °C\u003c\/li\u003e\n\u003cli\u003eSoftware: LeRobot (Python); runs on a PC or NVIDIA Jetson\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55417278529863,"sku":"SEEED-114993667","price":4299.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2-114993667-so-arm101-low-cost-ai-arm-servo-motor-kit-pro-for-lerobot_74ed0d5b-1f58-4df0-bbda-b2a1eb7ba203.jpg?v=1792929345"},{"product_id":"hiwonder-xarm-1s-6-dof-bus-servo-robotic-arm-unassembled-assembled","title":"Hiwonder xArm 1S — 6-DOF Bus Servo Robotic Arm (Unassembled \/ Assembled)","description":"\u003cp\u003eA desktop robotic arm with an aluminium alloy frame and six serial bus servos (five joints plus gripper). Each servo reports position, voltage and temperature back to the controller, so poses can be taught by moving the arm by hand and played back as action groups. Control it from PC software, the mobile app, the included wireless gamepad or your own Arduino code.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDegrees of freedom: 6 (5 + gripper)\u003c\/li\u003e\n\u003cli\u003eServos: Hiwonder LX-15D and LX-225 bus servos, plus one No.1 bus servo\u003c\/li\u003e\n\u003cli\u003eController: xArm 1S bus servo controller, Arm-core CPU, 16 MB storage, Arduino-programmable\u003c\/li\u003e\n\u003cli\u003eCommunication: USB and Bluetooth\u003c\/li\u003e\n\u003cli\u003eControl: PC software, iOS\/Android app, wireless PS2-style gamepad, mouse\u003c\/li\u003e\n\u003cli\u003ePower: 7.5 V 6 A DC adapter (included)\u003c\/li\u003e\n\u003cli\u003eArm dimensions: 154 × 140 × 426 mm\u003c\/li\u003e\n\u003cli\u003eArm weight: 0.9 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box (unassembled)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArm brackets with servo horns\u003c\/li\u003e\n\u003cli\u003e4 × LX-15D servos, 1 × LX-225 servo, 1 × No.1 bus servo\u003c\/li\u003e\n\u003cli\u003eBus servo controller, USB cable\u003c\/li\u003e\n\u003cli\u003eWireless gamepad and receiver\u003c\/li\u003e\n\u003cli\u003e7.5 V 6 A power adapter, screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe assembled version ships as a ready-to-use arm with gamepad, receiver, USB cable, power adapter and screwdriver.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003eOrdered from Hiwonder when you place your order.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Unassembled","offer_id":55417285247303,"sku":"HIW-21010002","price":3939.0,"currency_code":"SEK","in_stock":true},{"title":"Assembled","offer_id":55417285280071,"sku":"HIW-21010104","price":4639.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/Denoised_beauty_fd1c2f21-c347-4e0f-ad86-938a455c8afd.png?v=1791965843"},{"product_id":"booster-k1-humanoid-robot","title":"Booster K1 — Humanoid Robot for Education and Research","description":"\u003cp\u003eBooster K1 is a 95 cm humanoid robot from Booster Robotics, made as an entry-level platform for embodied AI in classrooms, competitions and labs. It walks at up to 2 m\/s, gets back up after a fall and is programmed in Python or C++ through Booster's SDK. Booster Studio lets you develop and test in simulation and deploy the same code to the robot.\u003c\/p\u003e\u003ch3\u003eEditions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGeek: 48 TOPS AI compute, 2 Ah battery, about 20 minutes of walking\u003c\/li\u003e\n\u003cli\u003eEducation: 117 TOPS AI compute, 5 Ah battery, about 1 h 10 min of walking\u003c\/li\u003e\n\u003cli\u003eProfessional: 200 TOPS AI compute, 5 Ah battery, about 1 h 10 min of walking\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWalking times are Booster's figures at 1.1 m\/s.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: approx. 95 cm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 19.5 kg\u003c\/li\u003e\n\u003cli\u003eDegrees of freedom: 22 (head 2, arms 2 × 4, legs 2 × 6)\u003c\/li\u003e\n\u003cli\u003eJoints: up to 60 N·m peak torque, dual encoders\u003c\/li\u003e\n\u003cli\u003eSpeed: walking up to 2 m\/s, turning up to 1.5 rad\/s\u003c\/li\u003e\n\u003cli\u003eSensors: binocular (stereo) camera, 9-axis IMU, microphone array, speaker\u003c\/li\u003e\n\u003cli\u003eConnectivity: Wi-Fi 6, Bluetooth 5.2, Gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003eSoftware: SDK for Python and C++, Booster Studio, Booster App for setup and control\u003c\/li\u003e\n\u003cli\u003eSafety: soft and hard emergency stop, voice alerts for low battery and joint over-temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Booster Robotics","offers":[{"title":"Default Title","offer_id":55418160382279,"sku":"BOOSTER-K1","price":0.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/booster-k1-humanoid-robot.png?v=1791978533"},{"product_id":"hiwonder-mechdog-ai-esp32-quadruped-robot-dog-with-ai-vision-and-voice-module-standard-kit","title":"Hiwonder MechDog AI — ESP32 Quadruped Robot Dog with AI Vision and Voice Module, Standard Kit","description":"\u003cp\u003eAn open-source four-legged robot dog with an aluminium alloy body, eight coreless servos and an ESP32 controller. The WonderLLM module on its head, based on an ESP32-S3, adds a camera, microphone and speaker, so the robot can be connected to large AI models for vision and voice interaction. It is programmed in Scratch, Arduino or Python and can be controlled from a PC or Hiwonder's app.\u003c\/p\u003e\u003cp\u003eThis is the Standard Kit. The robotic arm attachment is part of Hiwonder's Advanced Kit and is not included.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eController: ESP32 (Wi-Fi and Bluetooth)\u003c\/li\u003e\n\u003cli\u003eAI module: WonderLLM (ESP32-S3) with 2 MP camera, microphone and speaker\u003c\/li\u003e\n\u003cli\u003eDegrees of freedom: 8\u003c\/li\u003e\n\u003cli\u003eServos: 8 × HPS-0618SG coreless servos\u003c\/li\u003e\n\u003cli\u003eSensors: 6-axis IMU\u003c\/li\u003e\n\u003cli\u003eBattery: 7.4 V 1500 mAh 5C Li-ion\u003c\/li\u003e\n\u003cli\u003eBody: aluminium alloy\u003c\/li\u003e\n\u003cli\u003eProgramming: Scratch, Arduino, Python\u003c\/li\u003e\n\u003cli\u003eControl: PC software or mobile app (iOS and Android)\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 21040108\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003eOrdered from Hiwonder when you place your order.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55431272333639,"sku":"HIW-21040162","price":7479.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2_8fa14255-564b-49bd-bded-28e58b0587c3.jpg?v=1792052510"},{"product_id":"seeed-studio-recamera-gimbal-2002w-64gb-pan-tilt-ai-camera-kit-with-brushless-motors","title":"Seeed Studio reCamera Gimbal 2002w 64GB — Pan-Tilt AI Camera Kit with Brushless Motors","description":"\u003cp\u003eA reCamera 2002w (with Wi-Fi) mounted on a two-axis gimbal driven by brushless motors. The camera runs object detection on the device and can steer the gimbal itself, so it can follow a person or object, scan a room or point at targets from a Node-RED flow or your own code. Video is available as an RTSP stream. The kit is assembled by the user.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCamera: reCamera 2002w, 64 GB eMMC, Wi-Fi\u003c\/li\u003e\n\u003cli\u003eAI: RISC-V SoC with 1 TOPS @ INT8 NPU, YOLO models included\u003c\/li\u003e\n\u003cli\u003eVideo: up to 5 MP at 30 fps encoding, RTSP streaming\u003c\/li\u003e\n\u003cli\u003eGimbal: 2 axes, brushless motors\u003c\/li\u003e\n\u003cli\u003ePan (yaw): about 345° mechanical range; tilt (pitch): 0–180°\u003c\/li\u003e\n\u003cli\u003eSpeed: up to 720°\/s\u003c\/li\u003e\n\u003cli\u003ePower: 12 V DC via 5.5 × 2.1 mm barrel jack (12 V \/ 2 A adapter recommended)\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB-C (setup), DC input, user button\u003c\/li\u003e\n\u003cli\u003eSoftware: Linux, Node-RED, SSH and web interface\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 108990120\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cp\u003e12 V power adapter and USB-C cable are not included.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55443587236167,"sku":"SEEED-108990120","price":3949.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2-108990119-recamera-gimbal-2002w-8gb_2_75eb4c1d-15c5-422e-bcaa-ee745a43f42c.jpg?v=1792929344"},{"product_id":"hiwonder-maxarm-esp32-open-source-desktop-robot-arm-starter-standard-advanced-kit","title":"Hiwonder MaxArm — ESP32 Open-Source Desktop Robot Arm (Starter \/ Standard \/ Advanced Kit)","description":"\u003cp\u003eA 4-DOF desktop robot arm controlled by an open-source ESP32 board. It can be programmed in Python or Arduino and is used to learn inverse kinematics, pick-and-place and sensor-driven automation. The arm comes assembled and can also be controlled from a PC program, a phone app (iOS\/Android) or a wireless handle. A suction cup is included as end effector.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDegrees of freedom: 4\u003c\/li\u003e\n\u003cli\u003eController: ESP32, Wi-Fi and Bluetooth\u003c\/li\u003e\n\u003cli\u003eServos: HTS-35H bus servos and LFD-01M micro servo\u003c\/li\u003e\n\u003cli\u003eProgramming: Python, Arduino\u003c\/li\u003e\n\u003cli\u003eControl: PC software, iOS\/Android app, wireless handle (Standard and Advanced), mouse\u003c\/li\u003e\n\u003cli\u003eMaterial: metal and fibreglass board\u003c\/li\u003e\n\u003cli\u003ePower: 12 V \/ 5 A adapter\u003c\/li\u003e\n\u003cli\u003eDimensions: 158 × 160 × 260 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.3 kg\u003c\/li\u003e\n\u003cli\u003eManufacturer part numbers: 21010074 (Starter), 21010075 (Standard), 21010076 (Advanced)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter kit:\u003c\/strong\u003e assembled robot arm, 12 V 5 A power adapter, 3 × 3 cm block, USB cable, 4 suction cups, screwdriver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard kit:\u003c\/strong\u003e Starter kit plus wireless handle, glowing ultrasonic sensor, colour sensor, touch sensor, sound sensor, light sensor, digital tube, 2 infrared sensors, 3 × 30 cm 4-pin cables and screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced kit:\u003c\/strong\u003e Standard kit plus WonderCam AI vision module with metal bracket, fan module, dot matrix module and 3 × 50 cm 4-pin cables\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003eOrdered from Hiwonder when you place your order.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Starter Kit","offer_id":55443590021447,"sku":"HIW-21010074","price":3859.0,"currency_code":"SEK","in_stock":true},{"title":"Standard Kit","offer_id":55443590054215,"sku":"HIW-21010075","price":4689.0,"currency_code":"SEK","in_stock":true},{"title":"Advanced Kit","offer_id":55443590086983,"sku":"HIW-21010076","price":5429.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/MaxArm.png?v=1792138680"},{"product_id":"hiwonder-nexarm-6-axis-leader-follower-robot-arm-for-lerobot-and-imitation-learning","title":"Hiwonder NexArm — 6-Axis Leader\/Follower Robot Arm for LeRobot and Imitation Learning","description":"\u003cp\u003eA metal 6-axis robot arm for embodied-AI work with Hugging Face LeRobot. It is sold as a follower arm (the arm that performs the task) and a leader arm (moved by hand to teleoperate the follower and record demonstrations). Together they are used to collect data and train policies such as ACT, Diffusion Policy and Pi0. All joints use bus servos with magnetic encoders and dual output shafts.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAxes: 6\u003c\/li\u003e\n\u003cli\u003eFollower arm servos: 2 × HX-12H, 3 × HX-30HM, 1 × HX-65HM (1:345 gear ratio)\u003c\/li\u003e\n\u003cli\u003eLeader arm servos: 5 × HX-10HM, 1 × HX-12H (1:147 gear ratio)\u003c\/li\u003e\n\u003cli\u003eConstruction: metal frame and housing, metal gears\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB serial, Bluetooth, Wi-Fi\u003c\/li\u003e\n\u003cli\u003eSoftware: LeRobot compatible; Arduino IDE; Windows, Linux and macOS\u003c\/li\u003e\n\u003cli\u003ePower: 12 V \/ 5 A (5.5 × 2.5 mm DC)\u003c\/li\u003e\n\u003cli\u003eFollower arm: 111 × 111 × 614 mm, 1.3 kg\u003c\/li\u003e\n\u003cli\u003eLeader arm: 111 × 216 × 619 mm, 1.2 kg\u003c\/li\u003e\n\u003cli\u003eManufacturer part numbers: 21010616 (follower), 21010659 (leader)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor leader\/follower teleoperation and LeRobot data collection you need one of each arm.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003eOrdered from Hiwonder when you place your order.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Follower Arm","offer_id":55443594838343,"sku":"HIW-21010616","price":4769.0,"currency_code":"SEK","in_stock":true},{"title":"Leader Arm","offer_id":55443594871111,"sku":"HIW-21010659","price":4309.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/NexArm_LeRobot.png?v=1792138699"},{"product_id":"seeed-studio-lekiwi-kit-12-v-omnidirectional-mobile-base-for-so-arm101-and-lerobot","title":"Seeed Studio LeKiwi Kit (12 V) — Omnidirectional Mobile Base for SO-ARM101 and LeRobot","description":"\u003cp\u003eLeKiwi is an open-source, three-wheeled omnidirectional mobile base designed to carry an SO-ARM100 or SO-ARM101 robot arm, turning it into a mobile manipulator for Hugging Face LeRobot. A Raspberry Pi 5 on the base runs LeRobot and streams camera images, and the wheels are driven by three STS3215 serial bus servos in continuous-rotation mode. The kit is assembled by the user; the project was developed by SIGRobotics at UIUC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Raspberry Pi 5, cameras and the SO-ARM101 arm. This kit is the mobile base only.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDrive: 3 × omnidirectional wheels, 3 × STS3215 12 V serial bus servos (1:345)\u003c\/li\u003e\n\u003cli\u003eController: servo motor control board; Raspberry Pi 5 (4–16 GB, not included) as main computer\u003c\/li\u003e\n\u003cli\u003ePower: 12 V; 12 V 2 A power adapter and 5 V buck converter for the Raspberry Pi included\u003c\/li\u003e\n\u003cli\u003eStructure: 3D-printed base plates, motor mounts, wheel hubs, Raspberry Pi case and camera mounts\u003c\/li\u003e\n\u003cli\u003eSoftware: LeRobot (Python), open-source\u003c\/li\u003e\n\u003cli\u003eCompatible arms: SO-ARM100, SO-ARM101\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 114090065\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 × STS3215 12 V servos\u003c\/li\u003e\n\u003cli\u003e3 × omnidirectional wheels\u003c\/li\u003e\n\u003cli\u003e1 × set of 3D-printed LeKiwi parts\u003c\/li\u003e\n\u003cli\u003e1 × motor control board\u003c\/li\u003e\n\u003cli\u003e1 × DC-DC buck module (12\/24 V to 5 V)\u003c\/li\u003e\n\u003cli\u003e1 × 12 V 2 A power adapter and DC Y-cable\u003c\/li\u003e\n\u003cli\u003eUSB-C to USB-C and USB-C to USB-A cables\u003c\/li\u003e\n\u003cli\u003eM2, M3 and M4 screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55463976206663,"sku":"SEEED-114090065","price":3190.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-114090065-lekiwi-kit_1_1ddce7ea-0690-4f13-a121-229fdbeca774.jpg?v=1792929345"},{"product_id":"hiwonder-armpi-ultra-starter-kit-ros2-3d-vision-robot-arm-for-raspberry-pi-5-raspberry-pi-not-included","title":"Hiwonder ArmPi Ultra Starter Kit — ROS2 3D-Vision Robot Arm for Raspberry Pi 5 (Raspberry Pi not included)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eA desktop robot arm for learning ROS2, computer vision and manipulation on a Raspberry Pi 5. Six serial bus servos drive the arm and gripper, an STM32 co-processor handles servo control, and an Aurora930 Pro structured-light depth camera gives the Pi 3D data for locating, tracking and sorting objects. Hiwonder supplies ROS2 tutorials covering colour and shape recognition, 3D grasping, YOLO-based detection and integration with large language models for voice-driven tasks. This Starter Kit is the variant without Raspberry Pi 5; add your own Pi 5 (4 GB or more recommended).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eServos: 6 serial bus servos, up to 25 kg·cm, with position, voltage and temperature feedback\u003c\/li\u003e\n\u003cli\u003eDepth camera: Aurora930 Pro 3D structured light, working distance 15–300 cm\u003c\/li\u003e\n\u003cli\u003eMain controller: Raspberry Pi 5 (not included)\u003c\/li\u003e\n\u003cli\u003eServo controller: STM32F103 co-processor board\u003c\/li\u003e\n\u003cli\u003eSoftware: ROS2, Python, OpenCV; Hiwonder tutorials and apps\u003c\/li\u003e\n\u003cli\u003ePower: 7.4 V 6 A DC\u003c\/li\u003e\n\u003cli\u003eDimensions: 288 × 177 × 450 mm\u003c\/li\u003e\n\u003cli\u003eWeight: about 1.5 kg\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 21010522 (Starter Kit, without Raspberry Pi 5)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKit contents differ between Hiwonder's Starter, Standard and Advanced kits; check the packing list before ordering.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55477164605767,"sku":"HIW-21010522-STARTER","price":5709.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0_d81e81bb-e629-4c42-932a-83d21e2b4543.jpg?v=1792397777"},{"product_id":"seeed-studio-amazing-hand-8-dof-open-source-robotic-hand-kit-with-feetech-servos-right-left","title":"Seeed Studio Amazing Hand — 8-DOF Open-Source Robotic Hand Kit with Feetech Servos (Right \/ Left)","description":"\u003cp\u003eA four-finger robotic hand developed by Pollen Robotics as an open-source design, sold as a build-it-yourself kit. Each finger has two phalanges driven by two small serial bus servos in a parallel mechanism, so the hand can both bend and spread its fingers. The rigid parts are 3D-printable and covered by flexible shells, which makes it practical for grasping experiments, teleoperation and imitation-learning projects, for example mounted on a robot arm. The included driver board is made for a Seeed Studio XIAO; it can also be controlled from a Raspberry Pi, NVIDIA Jetson or another microcontroller over UART.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFingers: 4, each with 2 articulated phalanges\u003c\/li\u003e\n\u003cli\u003eDegrees of freedom: 8 (flexion\/extension and abduction\/adduction)\u003c\/li\u003e\n\u003cli\u003eActuators: 8 × Feetech SCS0009 serial bus servos (UART, 5 V, 1.89 kg·cm rated torque)\u003c\/li\u003e\n\u003cli\u003eController: servo driver board for Seeed Studio XIAO (XIAO not included); also usable with Raspberry Pi, Jetson or an MCU\u003c\/li\u003e\n\u003cli\u003eStructure: black ABS frames with flexible shells\u003c\/li\u003e\n\u003cli\u003eWeight: 400 g without servos\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0–40 °C\u003c\/li\u003e\n\u003cli\u003eManufacturer part numbers: 100063642 (right hand), 100062181 (left hand)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × servo driver board (XIAO-compatible)\u003c\/li\u003e\n\u003cli\u003e8 × Feetech SCS0009 servos, 8 × 3-pin breakout boards, 8 × 150 mm 3-pin cables\u003c\/li\u003e\n\u003cli\u003e1 × 12 V 3 A power adapter (5.5 × 2.5 mm) and 1 × DC pigtail cable\u003c\/li\u003e\n\u003cli\u003eFull structural kit: fingers, palm, wrist shells and frames\u003c\/li\u003e\n\u003cli\u003e16 × ball linkage rods, stainless steel pins, screws, lock nuts and washers\u003c\/li\u003e\n\u003cli\u003ePhillips screwdriver and decorative stickers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSupplied as a kit for self-assembly.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"Seeed Studio","offers":[{"title":"Right hand","offer_id":55493692326215,"sku":"SEEED-100063642","price":1699.0,"currency_code":"SEK","in_stock":false},{"title":"Left hand","offer_id":55493692358983,"sku":"SEEED-100062181","price":1699.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-100063642_amazing_hand_right-1_1_492e1a39-fc6e-4b49-9b8b-6c0b31f34512.jpg?v=1792929345"},{"product_id":"hiwonder-mentorpi-m1-raspberry-pi-5-ros2-mecanum-robot-car-with-lidar-starter-kit-raspberry-pi-5-not-included","title":"Hiwonder MentorPi M1 — Raspberry Pi 5 ROS2 Mecanum Robot Car with LiDAR, Starter Kit (Raspberry Pi 5 not included)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eA ROS2 robot car for learning mapping, navigation and computer vision on a Raspberry Pi 5. The aluminium chassis has four mecanum wheels driven by encoder motors, so it can move sideways and rotate on the spot. A 360° LiDAR provides the scan data for SLAM and path planning, and a 2-axis pan-tilt camera is used for colour, line and object tracking. Hiwonder supplies ROS2 Humble on Ubuntu 22.04 (in Docker) with Python examples and courses. This is the Starter kit without a Raspberry Pi 5; you add your own Pi 5.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eController: Hiwonder RRC Lite (STM32) together with a Raspberry Pi 5 (not included)\u003c\/li\u003e\n\u003cli\u003eChassis: aluminium alloy, mecanum wheels\u003c\/li\u003e\n\u003cli\u003eMotors: 4 × 310 metal-gear DC motors with AB-phase Hall encoders\u003c\/li\u003e\n\u003cli\u003eSensors: 360° LiDAR, 2-DOF monocular camera (640 × 480 at 30 fps)\u003c\/li\u003e\n\u003cli\u003eBattery: 7.4 V 2200 mAh LiPo with protection board\u003c\/li\u003e\n\u003cli\u003eSoftware: ROS2 Humble, Ubuntu 22.04, Python\u003c\/li\u003e\n\u003cli\u003eControl: mobile app, wireless gamepad, PC software\u003c\/li\u003e\n\u003cli\u003eDimensions: approx. 212 × 171 × 147 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 1.2 kg\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 21030491\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eThe assembled MentorPi M1 chassis with battery, LiDAR, monocular pan-tilt camera, wireless gamepad, charger, accessories and tools. Raspberry Pi 5 is not included. See Hiwonder's packing list for the Starter kit for the exact contents.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55493699404103,"sku":"HIW-21030491-STARTER","price":5709.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0_ea8185a1-ac67-4bff-917c-71cb34b10e1a.jpg?v=1792484556"},{"product_id":"pololu-tic-36v4","title":"Pololu Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Tic 36v4 is a USB-configurable stepper motor controller for high-power bipolar stepper motors. It uses discrete MOSFET H-bridges and supports six control interfaces, so it can be driven from a computer, microcontroller, RC receiver, potentiometer or encoder. It runs from 8 V to 50 V and offers microstepping down to 1\/256 step – a complete motion controller for a linear axis, a turntable or a camera slider without writing a stepper driver yourself.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne bipolar stepper motor; open-loop speed or position control\u003c\/li\u003e\n\u003cli\u003e8–50 V; about 4 A continuous per phase without heat sink, 6 A max with cooling\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, TTL serial (5 V), I2C, RC servo pulses, analog voltage, quadrature encoder, STEP\/DIR\u003c\/li\u003e\n\u003cli\u003eMicrostepping full to 1\/256 step; up to 50 000 steps per second\u003c\/li\u003e\n\u003cli\u003eOnboard 5 V regulator, digitally adjustable current limit; free configuration software for Windows, Linux and macOS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eConnectors unsoldered\u003c\/strong\u003e: headers and terminal blocks included loose. \u003cstrong\u003eConnectors soldered\u003c\/strong\u003e: header pins and terminal blocks pre-installed.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3141\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Unsoldered","offer_id":55502550171975,"sku":"POLOLU-3141","price":1249.0,"currency_code":"SEK","in_stock":true},{"title":"Soldered","offer_id":55502550204743,"sku":"POLOLU-3140","price":1339.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J10510.1200.jpg?v=1792535715"},{"product_id":"pololu-tic-t500","title":"Pololu Tic T500 USB Multi-Interface Stepper Motor Controller","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Tic T500 is a USB-configurable controller for basic open-loop control of one bipolar stepper motor, built on the MP6500 driver IC. It supports six control interfaces and runs from 4.5 V to 35 V with about 1.5 A per phase without a heat sink. Configure speed, acceleration and limits in Pololu's free software, then drive the motor from a PC, a microcontroller, an RC receiver or a plain potentiometer.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne bipolar stepper motor; open-loop speed or position control\u003c\/li\u003e\n\u003cli\u003e4.5–35 V; about 1.5 A continuous per phase without heat sink, 2.5 A peak with cooling\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, TTL serial (5 V), I2C, RC servo pulses, analog voltage, quadrature encoder, STEP\/DIR\u003c\/li\u003e\n\u003cli\u003eMicrostepping full to 1\/8 step; up to 50 000 steps per second\u003c\/li\u003e\n\u003cli\u003eOnboard 5 V regulator; free configuration software for Windows, Linux and macOS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eConnectors unsoldered\u003c\/strong\u003e: headers and terminal blocks included loose. \u003cstrong\u003eConnectors soldered\u003c\/strong\u003e: header pins and terminal blocks pre-installed.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3135\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Unsoldered","offer_id":55502552039751,"sku":"POLOLU-3135","price":969.0,"currency_code":"SEK","in_stock":true},{"title":"Soldered","offer_id":55502552072519,"sku":"POLOLU-3134","price":1089.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J9742.1200.jpg?v=1792535742"},{"product_id":"pololu-tic-t825","title":"Pololu Tic T825 USB Multi-Interface Stepper Motor Controller","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Tic T825 is a USB-configurable controller for basic open-loop speed or position control of one bipolar stepper motor, built around the TI DRV8825 driver. It supports six control methods including USB, serial, I2C, RC pulses, analog voltage and encoder input. Setup and monitoring are handled through Pololu's free configuration software.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne bipolar stepper motor; open-loop speed or position control\u003c\/li\u003e\n\u003cli\u003e8.5–45 V; about 1.5 A continuous per phase without heat sink, 2.5 A peak with cooling\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, TTL serial (5 V), I2C, RC servo pulses, analog voltage, quadrature encoder, STEP\/DIR\u003c\/li\u003e\n\u003cli\u003eMicrostepping full to 1\/32 step; up to 50 000 steps per second\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5 V regulator; reverse protection on the motor supply up to 40 V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with male headers and terminal blocks included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3131\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502553547079,"sku":"POLOLU-3131","price":859.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J7822.1200.jpg?v=1792535757"},{"product_id":"pololu-tic-t834","title":"Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (low voltage)","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Tic T834 is a low-voltage stepper motor controller based on the TI DRV8834 driver, running from 2.5 V to 10.8 V – the Tic for battery-powered robots and small steppers. It supports six control interfaces including USB, serial, I2C, RC, analog and encoder inputs and is configured over USB with free software.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne bipolar stepper motor; open-loop speed or position control\u003c\/li\u003e\n\u003cli\u003e2.5–10.8 V; about 1.5 A continuous per phase without heat sink, 2 A peak with cooling\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, TTL serial (5 V), I2C, RC servo pulses, analog voltage, quadrature encoder, STEP\/DIR\u003c\/li\u003e\n\u003cli\u003eMicrostepping full to 1\/32 step; up to 50 000 steps per second\u003c\/li\u003e\n\u003cli\u003eFree configuration software for Windows, Linux and macOS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with male headers and terminal blocks included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3133\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502553874759,"sku":"POLOLU-3133","price":1269.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J8070.1200.jpg?v=1792535773"},{"product_id":"pololu-tic-t249","title":"Pololu Tic T249 USB Multi-Interface Stepper Motor Controller","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Tic T249 is a USB-configurable controller for one bipolar stepper motor, built on Toshiba's TB67S249FTG driver with automatic current reduction based on load – cooler motors and less wasted power than a fixed-current driver. It supports six control interfaces and runs from 10 V to 47 V at about 1.8 A per phase without a heat sink.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne bipolar stepper motor; open-loop speed or position control\u003c\/li\u003e\n\u003cli\u003e10–47 V; about 1.8 A continuous per phase without heat sink, 4.5 A peak with cooling\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, TTL serial (5 V), I2C, RC servo pulses, analog voltage, quadrature encoder, STEP\/DIR\u003c\/li\u003e\n\u003cli\u003eAutomatic Gain Control (AGC) adapts motor current to load\u003c\/li\u003e\n\u003cli\u003eMicrostepping full to 1\/32 step; onboard 5 V regulator; free configuration software\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with male headers and terminal blocks included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3139\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502554235207,"sku":"POLOLU-3139","price":1259.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J9843.1200.jpg?v=1792535788"},{"product_id":"pololu-jrk-g2-21v3","title":"Pololu Jrk G2 21v3 USB Motor Controller with Feedback","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Jrk G2 21v3 is a compact controller for a single brushed DC motor that can regulate either speed or position in a closed loop using analog or frequency feedback – turn a gearmotor with a potentiometer into a servo, or hold a set speed under load. It accepts commands over USB, serial, I2C, analog input or RC pulses and is configured through Pololu's free software.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne brushed DC motor; closed-loop speed or position control, or open loop\u003c\/li\u003e\n\u003cli\u003e4.5–28 V (transients to 40 V); 2.6 A continuous without heat sink, 5 A peak\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, TTL serial (5 V), I2C, analog voltage, RC servo pulses\u003c\/li\u003e\n\u003cli\u003eFeedback: analog 0–5 V, frequency, or none; PID tuning in the software\u003c\/li\u003e\n\u003cli\u003eBoard 1.0 × 1.2 in; PWM 20 kHz (configurable 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with breakaway male header and two 2-pin terminal blocks included, not soldered. USB micro-B cable not included.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3142\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502554530119,"sku":"POLOLU-3142","price":1089.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J8913.1200.jpg?v=1792535803"},{"product_id":"pololu-jrk-g2-24v13","title":"Pololu Jrk G2 24v13 USB Motor Controller with Feedback","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Jrk G2 24v13 is a USB motor controller for closed-loop speed or position control of a single brushed DC motor – the big brother of the 21v3 for linear actuators, winches and heavy gearmotors. It supports five control interfaces and is configured through Pololu's free software on Windows, Linux and macOS. It operates from 6.5 V to 40 V and delivers up to 13 A continuous without a heat sink.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne brushed DC motor; closed-loop speed or position control, or open loop\u003c\/li\u003e\n\u003cli\u003e6.5–40 V (recommended max 34 V, max nominal battery 28 V); 13 A continuous without heat sink; hardware current limiting\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, TTL serial (5 V), I2C, analog voltage, RC servo pulses\u003c\/li\u003e\n\u003cli\u003eFeedback: analog 0–5 V, frequency, or none\u003c\/li\u003e\n\u003cli\u003ePWM 20 kHz (configurable 5 kHz); reversed-power protection; board about 1.4 × 1.2 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with 0.1\" breakaway male header and two 2-pin 5 mm terminal blocks included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3147\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502554792263,"sku":"POLOLU-3147","price":2709.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J8647.1200.jpg?v=1792535818"},{"product_id":"pololu-g2-high-power-motor-driver","title":"Pololu G2 High-Power Motor Driver — 18v17, 18v25 and 24v21","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu G2 High-Power Motor Drivers are discrete MOSFET H-bridges for driving one large brushed DC motor in both directions – wheelchair motors, winches, big robot drive motors. They take a simple PWM + DIR interface from any 1.8–5 V microcontroller, support ultrasonic PWM up to 100 kHz, and the second-generation design adds reverse-voltage protection, current sensing and an adjustable current limit. All three share the same 1.3 × 0.8 in footprint.\u003c\/p\u003e\u003ch3\u003eVariants\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18v17\u003c\/strong\u003e: 6.5–30 V, 17 A continuous without heat sink, current limit ~40 A (adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18v25\u003c\/strong\u003e: 6.5–30 V, 25 A continuous without heat sink, current limit ~60 A (adjustable), fault output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24v21\u003c\/strong\u003e: 6.5–40 V (28 V nominal battery max), 21 A continuous without heat sink, current limit ~50 A (adjustable)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePWM + DIR interface, logic 1.8\/3.3\/5 V; PWM up to 100 kHz\u003c\/li\u003e\n\u003cli\u003eAnalog current sense output (~20 mV\/A on 18v17 and 24v21, ~10 mV\/A on 18v25)\u003c\/li\u003e\n\u003cli\u003eReverse-voltage, undervoltage and short-circuit protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with two 8-pin male headers and two 2-pin 5 mm terminal blocks included, not soldered. Terminal blocks are rated 16 A; solder wires directly for higher currents.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/category\/11\/brushed-dc-motor-drivers\" target=\"_blank\" rel=\"noopener\"\u003ePololu product pages\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"18v17","offer_id":55502556299591,"sku":"POLOLU-2991","price":949.0,"currency_code":"SEK","in_stock":true},{"title":"18v25","offer_id":55502556332359,"sku":"POLOLU-2994","price":1369.0,"currency_code":"SEK","in_stock":true},{"title":"24v21","offer_id":55502556365127,"sku":"POLOLU-2995","price":1069.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J7101.1200.jpg?v=1792535840"},{"product_id":"pololu-vnh5019-motor-driver-carrier","title":"Pololu VNH5019 Motor Driver Carrier — 12 A, 5.5–24 V","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThis is a breakout board for ST's VNH5019 high-power H-bridge, used to control one brushed DC motor in both directions. It is rated for 12 A continuous with a 5.5–24 V motor supply and supports ultrasonic PWM up to 20 kHz for quieter operation. It includes an analog current sense output and the VNH5019's built-in protection – a robust, forgiving driver for a mid-size robot or a 12 V actuator.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne brushed DC motor, bidirectional\u003c\/li\u003e\n\u003cli\u003e5.5–24 V; 12 A continuous, 30 A peak\u003c\/li\u003e\n\u003cli\u003ePWM up to 20 kHz; INA\/INB direction, ENA\/ENB enable; 3 V compatible logic\u003c\/li\u003e\n\u003cli\u003eAnalog current sense output ~140 mV\/A\u003c\/li\u003e\n\u003cli\u003eProtection: reverse voltage, over\/under voltage, over-temperature, over-current, short to ground\/VCC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with 20-pin breakaway male header and two 2-pin terminal blocks included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/1451\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502556922183,"sku":"POLOLU-1451","price":849.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J10254.1200.jpg?v=1792535856"},{"product_id":"pololu-mini-maestro-18","title":"Pololu Mini Maestro 18-Channel USB Servo Controller (Assembled)","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Mini Maestro 18 is a compact servo controller and general-purpose I\/O board with a native USB interface and onboard scripting. It drives RC servos or ESCs with 0.25 µs resolution and per-channel speed and acceleration control, so a hexapod, a robot arm or an animatronic can run smooth, scripted motion sequences without a host computer. Any channel can also be used as a digital output or as an analog\/digital input.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e18 channels, each usable as servo output, digital output or analog\/digital input\u003c\/li\u003e\n\u003cli\u003eInterfaces: native USB, TTL (5 V) serial, internal scripting (8 KB script memory)\u003c\/li\u003e\n\u003cli\u003ePulse resolution 0.25 µs, pulse rate 1–333 Hz, pulse range 64–4080 µs\u003c\/li\u003e\n\u003cli\u003ePowered from USB or 5–16 V; regulated 5 V output\u003c\/li\u003e\n\u003cli\u003eBoard 2.79 × 4.57 cm, 4.9 g; Pololu Maestro Control Center software for Windows, Linux and macOS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eAssembled board with 0.1\" male header pins installed. USB A to mini-B cable not included.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/1354\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502557643079,"sku":"POLOLU-1354","price":939.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J9910.1200.jpg?v=1792535872"},{"product_id":"pololu-d36v50f5","title":"Pololu 5 V, 5.5 A Step-Down Voltage Regulator D36V50F5","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThis is a synchronous step-down (buck) regulator that produces a fixed 5 V output from inputs up to 50 V – run a Raspberry Pi, servos or a logic board straight from a 12 V, 24 V or 36 V battery. It is far more efficient than a linear regulator, especially with large input-output differences, and delivers around 5.5 A typical.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFixed 5 V output (4 % accuracy); input 5.5–50 V\u003c\/li\u003e\n\u003cli\u003eTypical max output current 5.5 A at 36 V in (3.5–8 A depending on conditions)\u003c\/li\u003e\n\u003cli\u003eEfficiency about 80–95 %; switching ~500 kHz; quiescent current 2–4 mA\u003c\/li\u003e\n\u003cli\u003eReverse-voltage protection to 40 V; over-current, short-circuit, over\/undervoltage and over-temperature protection; EN and PG pins\u003c\/li\u003e\n\u003cli\u003e25.4 × 25.4 × 9.5 mm; three mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with straight male header strips included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/4091\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502558298439,"sku":"POLOLU-4091","price":839.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J10723.1200.jpg?v=1792535887"},{"product_id":"pololu-dual-g2-24v14-shield","title":"Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThis shield lets an Arduino or compatible board drive two high-power brushed DC motors. Its discrete MOSFET H-bridges handle 6.5 V to 40 V and deliver up to 14 A continuous per channel, with current sensing, adjustable current limiting and ultrasonic PWM support. The motor control lines are also broken out along one edge, so the board works as a standalone dual driver with any microcontroller.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 channels, two brushed DC motors, bidirectional\u003c\/li\u003e\n\u003cli\u003e6.5–40 V (28 V nominal battery max); 14 A continuous per channel without heat sink; current limit ~40 A, adjustable\u003c\/li\u003e\n\u003cli\u003eArduino shield headers plus 0.1\" side header for other microcontrollers; logic 1.8\/3.3\/5 V; PWM up to 100 kHz\u003c\/li\u003e\n\u003cli\u003eIntegrated 7.5 V (or 5 V) 1 A step-down regulator can power the Arduino\u003c\/li\u003e\n\u003cli\u003eBoard 2.56 × 2.02 in; Arduino library provided\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003ePartial kit: SMD parts populated; headers, terminal blocks and 40-pin male header included for the user to solder.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/2516\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502558921031,"sku":"POLOLU-2516","price":1519.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J8103.1200.jpg?v=1792535904"},{"product_id":"pololu-dual-g2-18v22-raspberry-pi","title":"Pololu Dual G2 High-Power Motor Driver 18v22 for Raspberry Pi (Partial Kit)","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThis Raspberry Pi add-on board drives two brushed DC motors using discrete MOSFET H-bridges – the drive stage for a heavy Pi-based rover or robot platform. It accepts 6.5 V to 30 V and can supply 22 A per channel continuously without a heat sink, while its onboard regulator powers the Pi from the same battery. The default GPIO mapping can be changed for custom setups.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 channels, two brushed DC motors, bidirectional\u003c\/li\u003e\n\u003cli\u003e6.5–30 V (not for 24 V batteries); 22 A continuous per channel without heat sink; current limit ~60 A, adjustable\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 40-pin HAT-style header; 6 GPIO for control, 2 for fault status; PWM up to 100 kHz\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5 V 2.5 A regulator powers the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eReverse-voltage, undervoltage and short-circuit protection; Python library provided\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003ePartial kit: SMD parts installed; 2×20 female header, three 2-pin terminal blocks and mounting hardware included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/3754\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502559936839,"sku":"POLOLU-3754","price":1909.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J8147.1200.jpg?v=1792535922"},{"product_id":"pololu-dual-mc33926-raspberry-pi","title":"Pololu Dual MC33926 Motor Driver for Raspberry Pi (Assembled)","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThis add-on board lets a Raspberry Pi drive two brushed DC motors using a pair of MC33926 motor driver ICs – the easy route to a small Pi-based rover. It supports 5 V to 28 V motor supplies and delivers up to 3 A continuous per channel. Default pin mappings work with Pololu's Python library, and most of the driver chips' remaining I\/O pins are broken out for custom use.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 channels, two brushed DC motors, dual MC33926 drivers\u003c\/li\u003e\n\u003cli\u003e5–28 V; 3 A continuous, 5 A peak per motor\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi HAT form factor for all 40-pin models; 6 GPIO for control, 2 status flags\u003c\/li\u003e\n\u003cli\u003ePWM up to 20 kHz; Python library provided\u003c\/li\u003e\n\u003cli\u003eReverse-voltage protection, under-voltage shutdown, short-to-ground\/Vcc protection, thermal and current limiting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eAssembled: 2×20 female header and 6-pin screw terminal strip pre-soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/2756\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502561575239,"sku":"POLOLU-2756","price":1419.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J6596.1200.jpg?v=1792535937"},{"product_id":"pololu-motoron-m3s256-shield-kit","title":"Pololu Motoron M3S256 Triple Motor Controller Shield Kit for Arduino","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Pololu Motoron M3S256 is an Arduino shield that controls up to three brushed DC motors over I2C, so it needs no PWM pins or timers on the Arduino. Several units can be stacked to control more motors – six or nine motors from one UNO. This kit version includes header and terminal block options that the user solders in.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 bidirectional brushed DC motor channels; boards stackable\u003c\/li\u003e\n\u003cli\u003e4.5–48 V (recommended max nominal battery ~36 V); 2.0 A continuous per motor, 6.4 A peak\u003c\/li\u003e\n\u003cli\u003eI2C up to 400 kHz with optional CRC; logic 3.0–5.5 V; Arduino library provided\u003c\/li\u003e\n\u003cli\u003ePWM frequency selectable 1–80 kHz\u003c\/li\u003e\n\u003cli\u003eReverse-voltage protection on the motor supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eKit: board with stackable female headers, 3.5 mm and 5 mm terminal blocks and a male header included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/5031\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page and user's guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502562165063,"sku":"POLOLU-5031","price":1019.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J11630.1200.jpg?v=1792535953"},{"product_id":"pololu-tb67s249ftg-stepper-driver","title":"Pololu TB67S249FTG Stepper Motor Driver Carrier — Full Breakout, 10–47 V","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThis is a full breakout board for Toshiba's TB67S249FTG microstepping bipolar stepper motor driver – a step\/dir driver for a 3D printer, CNC or laser axis that needs more voltage and protection than an A4988. It supports a 10 V to 47 V motor supply and about 1.7 A per phase continuously without a heat sink. It includes adjustable current limiting, six microstep resolutions and built-in protection features.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne bipolar stepper motor; Toshiba TB67S249FTG driver\u003c\/li\u003e\n\u003cli\u003e10–47 V; about 1.7 A continuous per phase without cooling, 4.5 A peak\u003c\/li\u003e\n\u003cli\u003eStep\/direction interface, 3.3 V and 5 V logic; full, 1\/2, 1\/4, 1\/8, 1\/16 and 1\/32 microstepping\u003c\/li\u003e\n\u003cli\u003eAdjustable current limit via potentiometer; Active Gain Control; 5 V regulated output\u003c\/li\u003e\n\u003cli\u003eBoard 1.0 × 1.4 in; under-voltage, over-current, over-temperature, open-load and reverse-voltage protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eBoard with two 1×15 breakaway male headers and three 2-pin terminal blocks included, not soldered.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.pololu.com\/product\/2973\" target=\"_blank\" rel=\"noopener\"\u003ePololu product page\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Pololu Corporation, Las Vegas, USA. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":55502562492743,"sku":"POLOLU-2973","price":799.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0J8755.1200.jpg?v=1792535969"},{"product_id":"hiwonder-tonypi","title":"Hiwonder TonyPi — 18DOF AI Humanoid Robot with Raspberry Pi 5 (4 GB)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eTonyPi is a Raspberry Pi 5-based humanoid robot with 18 degrees of freedom driven by 16 LX-824HV bus servos and a 2DOF HD camera head. It supports OpenCV and MediaPipe vision tasks such as colour recognition, target tracking, face detection and line following, plus pre-programmed actions and a graphical action editor. The Advanced Kit adds the WonderEcho Pro voice box for voice control and ChatGPT-style multimodal interaction. Both kits ship with the Raspberry Pi 5 4 GB and SD card installed.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e18DOF bipedal humanoid (16 body joints + 2DOF camera head), hard aluminium-alloy structure\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 5 4 GB included, on Hiwonder's Raspberry Pi expansion board\u003c\/li\u003e\n\u003cli\u003e16 × LX-824HV high-voltage intelligent bus servos (body), anti-blocking servos in the head\u003c\/li\u003e\n\u003cli\u003e480P HD wide-angle camera; OpenCV, MediaPipe; OpenAI\/OpenRouter LLM APIs\u003c\/li\u003e\n\u003cli\u003e11.1 V 2000 mAh battery, about 60 min runtime\u003c\/li\u003e\n\u003cli\u003ePython; iOS\/Android app and PC action editor; Wi-Fi and Ethernet\u003c\/li\u003e\n\u003cli\u003e373 × 186 × 106 mm, about 1.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Kit\u003c\/strong\u003e: complete robot with Raspberry Pi 5 4 GB, camera head and battery; vision projects and action programming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Kit\u003c\/strong\u003e: Standard plus the WonderEcho Pro AI voice interaction box for voice control and multimodal LLM (ChatGPT) projects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembled TonyPi with Raspberry Pi 5 4 GB, expansion board, camera head and battery\u003c\/li\u003e\n\u003cli\u003eBattery charger\u003c\/li\u003e\n\u003cli\u003eColoured EVA balls and tag cards\u003c\/li\u003e\n\u003cli\u003eCard reader, accessory bag with cables, hardware and screwdriver\u003c\/li\u003e\n\u003cli\u003eAdvanced Kit: WonderEcho Pro voice box with cable and mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/tonypi\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and Hiwonder's online tutorials.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Standard Kit","offer_id":55505937170759,"sku":"HW-TONYPI-STD-PI5","price":11749.0,"currency_code":"SEK","in_stock":true},{"title":"Advanced Kit","offer_id":55505937203527,"sku":"HW-TONYPI-ADV-PI5","price":13259.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/299A75FA14353575AEED9FEDE990E5D6.png?v=1792570331"},{"product_id":"hiwonder-turbopi","title":"Hiwonder TurboPi — ROS2 Mecanum-Wheel AI Vision Robot Car for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eTurboPi is a Raspberry Pi-based robot car with four mecanum wheels, a 2DOF camera pan-tilt, an ultrasonic sensor and a four-channel line follower. It is programmed in Python with OpenCV and runs ROS2, with courses covering colour recognition, target tracking, line following, QR-code recognition and autonomous driving. The Advanced Kit adds the WonderEcho Pro voice box and the multimodal LLM and voice-interaction projects. \u003cstrong\u003eThe Raspberry Pi 5 is not included\u003c\/strong\u003e – add a Raspberry Pi 5 (any RAM size) from our Raspberry Pi range.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour omnidirectional mecanum wheels on a metal chassis\u003c\/li\u003e\n\u003cli\u003eHiwonder Raspberry Pi 5 expansion board and Pi 5 system image (Pi 5 not included)\u003c\/li\u003e\n\u003cli\u003e2DOF camera pan-tilt with 2 × LFD-01 anti-blocking servos; 480P wide-angle USB camera\u003c\/li\u003e\n\u003cli\u003eRGB ultrasonic sensor and 4-channel infrared line follower\u003c\/li\u003e\n\u003cli\u003e2 × 18650 batteries (1800 mAh Standard \/ 2200 mAh Advanced), about 60 min runtime\u003c\/li\u003e\n\u003cli\u003eROS2, Python, OpenCV, YOLO, MediaPipe; WonderPi app and PC\/VNC control; Wi-Fi and Ethernet\u003c\/li\u003e\n\u003cli\u003e187 × 162 × 139 mm, 0.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Kit\u003c\/strong\u003e: car with camera pan-tilt, ultrasonic and line-follower sensors; Python\/OpenCV course\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Kit\u003c\/strong\u003e: same hardware plus the WonderEcho Pro AI voice box and 2200 mAh batteries; adds the ROS2, MediaPipe, YOLO, voice-interaction and multimodal LLM course\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembled TurboPi chassis with motors and Raspberry Pi 5 expansion board\u003c\/li\u003e\n\u003cli\u003e2DOF pan-tilt with wide-angle camera, RGB ultrasonic module, line-follower sensor\u003c\/li\u003e\n\u003cli\u003e2 × 18650 batteries with holder and charger\u003c\/li\u003e\n\u003cli\u003eAccessory bag (cables, screws, tools)\u003c\/li\u003e\n\u003cli\u003eAdvanced Kit: WonderEcho Pro AI voice box\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/turbopi\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and Hiwonder's online tutorials.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Standard Kit (without Raspberry Pi 5)","offer_id":55505941725511,"sku":"HW-TURBOPI-STD-NOPI","price":2679.0,"currency_code":"SEK","in_stock":true},{"title":"Advanced Kit (without Raspberry Pi 5)","offer_id":55505941758279,"sku":"HW-TURBOPI-ADV-NOPI","price":3129.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/9cde0a20be6a120c7f27a19ba4f8296f_e310a29e-0cde-425f-a42e-c5fae46c9d78.jpg?v=1792570358"},{"product_id":"hiwonder-armpi-mini","title":"Hiwonder ArmPi mini — Desktop Vision Robotic Arm for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eArmPi mini is a small Raspberry Pi-controlled desktop robotic arm with four joints plus a gripper and an HD wide-angle camera. It uses OpenCV for colour recognition, colour sorting, target tracking and palletising, and inverse kinematics for positioning. It is programmed in Python and controlled from a phone app or a PC. \u003cstrong\u003eThe Raspberry Pi 5 is not included\u003c\/strong\u003e – add a Raspberry Pi 5 (any RAM size) from our Raspberry Pi range.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4DOF + gripper, aluminium-alloy brackets; inverse kinematics for positioning\u003c\/li\u003e\n\u003cli\u003eLDX-218 \/ LD-1501MG digital servos in the joints, LFD-01M micro servo in the gripper\u003c\/li\u003e\n\u003cli\u003e480P HD wide-angle USB camera, 170° field of view\u003c\/li\u003e\n\u003cli\u003eHiwonder Raspberry Pi 5 expansion board and system image (Pi 5 not included)\u003c\/li\u003e\n\u003cli\u003e2 × 18650 batteries, 1800 mAh, about 60 min operation\u003c\/li\u003e\n\u003cli\u003ePython, OpenCV; iOS\/Android app and PC control; Wi-Fi and Ethernet\u003c\/li\u003e\n\u003cli\u003e208 × 134 × 309 mm, 0.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembled robotic arm with base bracket set\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 5 expansion board (Pi 5 not included)\u003c\/li\u003e\n\u003cli\u003eBatteries, battery holder, charger and USB cable\u003c\/li\u003e\n\u003cli\u003eCard reader, 3 × blocks, paper map, accessory bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/armpi-mini\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and Hiwonder's online tutorials.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55505945264455,"sku":"HW-ARMPIMINI-NOPI","price":3299.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/5cd8d219e34e10bb9289031783d8d8d1_720.png?v=1792570380"},{"product_id":"hiwonder-mentorpi-m1","title":"Hiwonder MentorPi M1 — ROS2 Mecanum Robot Car with LiDAR \u0026 3D Depth Camera (Standard Kit)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eMentorPi M1 is a Raspberry Pi 5 robot car with four encoder motors on a mecanum-wheel metal chassis, a COIN-D6 LiDAR and, in the Standard Kit, a Nuwa-HP60C 3D depth camera. It runs ROS 2 Humble in Docker on Ubuntu 22.04 and supports SLAM mapping, path planning, omnidirectional navigation and YOLO-based sign recognition. Low-level motor and servo control is handled by the separate RRC Lite controller. \u003cstrong\u003eThe Raspberry Pi 5 is not included\u003c\/strong\u003e – add a Raspberry Pi 5 from our Raspberry Pi range.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-controller design: RRC Lite (STM32) motion controller + Raspberry Pi 5 (not included)\u003c\/li\u003e\n\u003cli\u003eFour mecanum wheels on a full-metal anodised aluminium chassis; 4 × 310 metal-gear motors with quadrature encoders\u003c\/li\u003e\n\u003cli\u003eNuwa-HP60C USB 3D depth camera, 0.2–4 m, depth 640×480, RGB 1920×1080\u003c\/li\u003e\n\u003cli\u003eCOIN-D6 TOF LiDAR for 2D mapping, navigation and obstacle avoidance\u003c\/li\u003e\n\u003cli\u003e7.4 V 2200 mAh LiPo with protection board\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi OS + Ubuntu 22.04 \/ ROS 2 Humble (Docker); Python; OpenCV, YOLOv11; app, wireless gamepad and PC control\u003c\/li\u003e\n\u003cli\u003e212 × 171 × 147 mm, about 1.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembled mecanum chassis with battery and RRC Lite controller\u003c\/li\u003e\n\u003cli\u003e3D depth camera and COIN-D6 LiDAR\u003c\/li\u003e\n\u003cli\u003eWireless handle with receiver, charger\u003c\/li\u003e\n\u003cli\u003eProject props, screwdriver and assembly accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/mentorpi-m1\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and Hiwonder's online tutorials.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55505949262151,"sku":"HW-MENTORPI-M1-STD-NOPI","price":7779.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0_1b7cab51-f96c-45e3-bb00-33d1bd6c5c0e.jpg?v=1792570402"},{"product_id":"hiwonder-mentorpi-a1","title":"Hiwonder MentorPi A1 — ROS2 Ackermann Robot Car with LiDAR \u0026 3D Depth Camera (Standard Kit)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eMentorPi A1 is a Raspberry Pi 5 robot car with an Ackermann-steering metal chassis, encoder motors, a COIN-D6 LiDAR and, in the Standard Kit, a Nuwa-HP60C 3D depth camera – the car-like platform for autonomous-driving projects. It runs ROS 2 Humble in Docker and supports SLAM mapping, path planning and YOLO-based road-sign and traffic-light recognition. The motion controller is a separate RRC Lite board. \u003cstrong\u003eThe Raspberry Pi 5 is not included\u003c\/strong\u003e – add a Raspberry Pi 5 from our Raspberry Pi range.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-controller design: RRC Lite (STM32) motion controller + Raspberry Pi 5 (not included)\u003c\/li\u003e\n\u003cli\u003eAckermann-steering full-metal chassis; 310 metal-gear motors with quadrature encoders; LD-1501MG steering servo\u003c\/li\u003e\n\u003cli\u003eNuwa-HP60C USB 3D depth camera, 0.2–4 m, depth 640×480, RGB 1920×1080\u003c\/li\u003e\n\u003cli\u003eCOIN-D6 TOF LiDAR for 2D mapping, navigation and obstacle avoidance\u003c\/li\u003e\n\u003cli\u003e7.4 V 2200 mAh LiPo with protection board\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi OS + Ubuntu 22.04 \/ ROS 2 Humble (Docker); Python; OpenCV, YOLOv11; app, wireless gamepad and PC control\u003c\/li\u003e\n\u003cli\u003e213 × 159 × 157 mm, about 1.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembled Ackermann chassis with battery and RRC Lite controller\u003c\/li\u003e\n\u003cli\u003e3D depth camera and COIN-D6 LiDAR\u003c\/li\u003e\n\u003cli\u003eWireless handle with receiver, charger\u003c\/li\u003e\n\u003cli\u003eProject props, screwdriver and assembly accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/mentorpi-a1\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and Hiwonder's online tutorials.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55505954079047,"sku":"HW-MENTORPI-A1-STD-NOPI","price":7779.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0_2_fbf8c4a5-dc4e-4b56-a5e9-acfbbe1248e3.jpg?v=1792570425"},{"product_id":"hiwonder-armpi-ultra","title":"Hiwonder ArmPi Ultra — ROS2 6DOF Robotic Arm with 3D Depth Camera (Standard Kit)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eArmPi Ultra is a 6DOF desktop robotic arm built from anodised aluminium with six feedback bus servos, controlled by an STM32 arm controller paired with a Raspberry Pi 5. The Standard Kit includes an Aurora 3D depth camera so the arm can recognise, track and grasp objects in 3D space using point clouds. It runs ROS 2 in a Docker environment with MoveIt and Gazebo support and is programmed in Python, C\/C++ or JavaScript. \u003cstrong\u003eThe Raspberry Pi 5 is not included\u003c\/strong\u003e – add a Raspberry Pi 5 from our Raspberry Pi range.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6DOF all-metal anodised aluminium arm with gripper, industrial bearing base\u003c\/li\u003e\n\u003cli\u003eSix intelligent serial bus servos with position feedback, up to 25 kg·cm\u003c\/li\u003e\n\u003cli\u003eDual-controller design: STM32F103 arm controller + Raspberry Pi 5 (not included)\u003c\/li\u003e\n\u003cli\u003eAurora930 Pro 3D depth camera, 15–300 cm, RGB+D fusion for point-cloud grasping\u003c\/li\u003e\n\u003cli\u003eMains powered: 7.4 V 6 A adapter (no battery)\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi OS + Ubuntu 22.04 \/ ROS 2 (Docker), MoveIt, Gazebo; app, PC software and ROS topic control; 64 GB SD card\u003c\/li\u003e\n\u003cli\u003e288 × 177 × 450 mm, about 1.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembled ArmPi Ultra arm with STM32 controller\u003c\/li\u003e\n\u003cli\u003eAurora depth camera\u003c\/li\u003e\n\u003cli\u003ePower adapter 7.4 V 6 A, wireless controller\u003c\/li\u003e\n\u003cli\u003eProject blocks, calibration tags and map, cables, tools and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/armpi-ultra\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and Hiwonder's online tutorials.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55505959584071,"sku":"HW-ARMPIULTRA-STD-NOPI","price":7199.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0_5c5d8c71-2247-4900-93d0-0a66b2aec071.jpg?v=1792570449"},{"product_id":"hiwonder-puppypi","title":"Hiwonder PuppyPi — ROS2 Quadruped Robot Dog with Raspberry Pi 5 (4 GB), Advanced Kit","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003ePuppyPi is a small quadruped robot dog built on a Raspberry Pi 5 with eight HPS-0618SG coreless servos in a linkage-leg design and a head-mounted wide-angle camera. It runs ROS 2 Humble (ROS 1 Noetic also supported) and is programmed in Python with OpenCV and MediaPipe for colour recognition, target tracking, face detection and line following. The Advanced Kit adds the WonderEcho Pro voice box for voice control and ChatGPT-style interaction. The Raspberry Pi 5 4 GB is included.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8DOF legged quadruped (2 joints per leg) with linkage legs, aluminium-alloy frame, inverse-kinematics gait\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 5 4 GB included, on Hiwonder's Raspberry Pi expansion board\u003c\/li\u003e\n\u003cli\u003e8 × HPS-0618SG coreless servos with stainless-steel gears\u003c\/li\u003e\n\u003cli\u003e480P HD wide-angle camera; WonderEcho Pro AI voice box\u003c\/li\u003e\n\u003cli\u003e7.4 V 2200 mAh LiPo\u003c\/li\u003e\n\u003cli\u003eUbuntu 22.04 + ROS 2 Humble; Python, OpenCV, MediaPipe, URDF\/Gazebo; PC software and iOS\/Android app\u003c\/li\u003e\n\u003cli\u003e226 × 149 × 190 mm, about 720 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAssembled PuppyPi with Raspberry Pi 5 4 GB, expansion board, camera and battery\u003c\/li\u003e\n\u003cli\u003eCharger\u003c\/li\u003e\n\u003cli\u003eWonderEcho Pro AI voice box\u003c\/li\u003e\n\u003cli\u003eVision props (coloured balls, tag cards), accessory bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNote\u003c\/h3\u003e\u003cp\u003eLiDAR and the robotic arm are only included in Hiwonder's Pro and Pro Ultimate kits, not in this Advanced Kit.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/puppypi\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and Hiwonder's online tutorials.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Default Title","offer_id":55505965285703,"sku":"HW-PUPPYPI-ADV-PI5","price":11679.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/PuppyPi_d08fa7b5-6449-4b27-a352-f1b15dd55c2f.png?v=1792570484"},{"product_id":"feetech-st3215-c047-12-v-30-kg-cm-serial-bus-servo-with-magnetic-encoder-so-arm101-follower-servo","title":"Feetech ST3215-C047 — 12 V 30 kg·cm Serial Bus Servo with Magnetic Encoder (SO-ARM101 Follower Servo)","description":"\u003cp\u003eThe 12 V, 30 kg·cm version of the Feetech ST3215 serial bus servo, the servo type used in the SO-ARM100 and SO-ARM101 arms for Hugging Face LeRobot. Use it as a spare for a follower arm, to build a 12 V follower arm, or in your own robot joints. Position is read by a 12-bit magnetic encoder, and the servos are daisy-chained on a single serial bus and addressed by ID.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Feetech ST3215-C047\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 12 V\u003c\/li\u003e\n\u003cli\u003eStall torque: 30 kg·cm\u003c\/li\u003e\n\u003cli\u003eRated torque: 10 kg·cm\u003c\/li\u003e\n\u003cli\u003eGearbox: 1:345, metal gears\u003c\/li\u003e\n\u003cli\u003ePosition sensor: 12-bit magnetic encoder\u003c\/li\u003e\n\u003cli\u003eCommunication: serial bus (TTL), daisy-chainable\u003c\/li\u003e\n\u003cli\u003eFunctions: one-touch midpoint calibration, programmable acceleration and deceleration\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (Seeed): 108090003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe 7.4 V leader-arm servos (other gear ratios) are not interchangeable with this 12 V version on the same bus supply. Needs a serial bus servo driver board, for example the one supplied with the SO-ARM101 kit, and a 12 V supply.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55505975509319,"sku":"SEEED-108090003","price":479.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-108090003-sts321530kg-serial-servo_1_0973ef70-0055-4227-9df7-06d0794ac8ff.jpg?v=1792929345"},{"product_id":"hiwonder-masterpi","title":"Hiwonder MasterPi — AI Vision Mecanum Robot Car with 5DOF Arm for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eMasterPi combines a four-wheel mecanum chassis with a 5DOF robotic arm. The HD wide-angle camera sits at the end of the arm, so the robot sees what it is about to grab: it recognises and sorts coloured blocks, follows lines, tracks targets and carries objects to a drop-off point. It is programmed in Python with OpenCV, and can also be driven from the WonderPi app (Android and iOS) or Hiwonder's PC software, where servos are moved with sliders and action groups are recorded without code.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMecanum-wheel chassis for 360° omnidirectional movement – forward, sideways, diagonal and on the spot\u003c\/li\u003e\n\u003cli\u003e5DOF arm with LDX-218 full-metal-gear digital servos (17 kg·cm, dual ball bearings)\u003c\/li\u003e\n\u003cli\u003eHD wide-angle camera on the end of the arm for first-person view and eye-in-hand grabbing\u003c\/li\u003e\n\u003cli\u003eRGB ultrasonic sensor for obstacle avoidance\u003c\/li\u003e\n\u003cli\u003ePython and OpenCV: colour recognition and sorting, line following, target tracking; LAB colour-threshold tool\u003c\/li\u003e\n\u003cli\u003eWonderPi app and PC software; aluminium-alloy frame; 18650 lithium batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithout Raspberry Pi 5\u003c\/strong\u003e: add a Raspberry Pi 5 from our Raspberry Pi range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Raspberry Pi 5 (4 GB)\u003c\/strong\u003e: Raspberry Pi 5 included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/masterpi\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and \u003ca href=\"https:\/\/docs.hiwonder.com\/projects\/MasterPi\/en\/latest\/\" target=\"_blank\" rel=\"noopener\"\u003eMasterPi tutorials\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Without Raspberry Pi 5","offer_id":55511304667463,"sku":"HW-MASTERPI-NOPI","price":4159.0,"currency_code":"SEK","in_stock":true},{"title":"With Raspberry Pi 5 (4 GB)","offer_id":55511304700231,"sku":"HW-MASTERPI-PI5-4GB","price":7009.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/MasterPi_a7ac1e8a-ff08-455c-bf03-2a43e3d54d9a.png?v=1792605206"},{"product_id":"hiwonder-mentorpi-t1","title":"Hiwonder MentorPi T1 — ROS2 Tank Robot with LiDAR \u0026 3D Depth Camera for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eMentorPi T1 is the tracked member of Hiwonder's MentorPi family – the same ROS 2 platform as the MentorPi M1 and A1, on a tank chassis that handles rougher floors and small obstacles. A Raspberry Pi 5 runs ROS 2 and the AI workloads while a separate controller handles the motors. The COIN-D6 LiDAR and the Aurora930 Pro 3D depth camera give it SLAM mapping, multi-point navigation, path planning, obstacle avoidance and target following, and the course material includes projects with multimodal large AI models for scene understanding and vision-language navigation. \u003cstrong\u003eThe Raspberry Pi 5 is not included\u003c\/strong\u003e – add one from our Raspberry Pi range.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTank (crawler) chassis with high-performance encoder motors\u003c\/li\u003e\n\u003cli\u003eCOIN-D6 LiDAR for SLAM mapping, navigation and obstacle avoidance\u003c\/li\u003e\n\u003cli\u003eAurora930 Pro 3D depth camera for depth processing and 3D visual mapping\u003c\/li\u003e\n\u003cli\u003eDual-controller design: Raspberry Pi 5 for ROS 2 and AI, separate controller for motion\u003c\/li\u003e\n\u003cli\u003eROS 2, Python, OpenCV; line patrolling, colour tracking and multimodal LLM projects\u003c\/li\u003e\n\u003cli\u003e7.4 V 2200 mAh LiPo battery with protection board, up to about 60 minutes runtime\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/mentorpi-t1\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and \u003ca href=\"https:\/\/docs.hiwonder.com\/projects\/MentorPi-T1\/en\/latest\/\" target=\"_blank\" rel=\"noopener\"\u003eMentorPi T1 tutorials\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Standard Kit (without Raspberry Pi 5)","offer_id":55511304732999,"sku":"HW-MENTORPI-T1-STD-NOPI","price":8249.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/MentorPi_Ti.png?v=1792605206"},{"product_id":"hiwonder-landerpi","title":"Hiwonder LanderPi — ROS2 Robot Car with 6DOF Arm, LiDAR \u0026 3D Depth Camera for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eLanderPi is a mobile manipulator: a ROS 2 robot car with a 6DOF robotic arm on top. The Aurora930 Pro 3D depth camera is mounted at the end of the arm, giving first-person vision for recognising, tracking and grasping objects, while the MS200 LiDAR handles SLAM mapping, path planning, fixed-point navigation and dynamic obstacle avoidance. Combined, it can drive to a location, find an object and pick it up – and the course material adds multimodal large AI model projects for scene understanding and language-driven tasks. Choose mecanum, Ackermann or tank chassis. \u003cstrong\u003eThe Raspberry Pi 5 is not included\u003c\/strong\u003e – add one from our Raspberry Pi range.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6DOF robotic arm with high-torque intelligent bus servos\u003c\/li\u003e\n\u003cli\u003eAurora930 Pro 3D depth camera at the end of the arm\u003c\/li\u003e\n\u003cli\u003eMS200 LiDAR for SLAM mapping and navigation\u003c\/li\u003e\n\u003cli\u003eDual-controller design: Raspberry Pi 5 for ROS 2 and AI, separate controller for motion\u003c\/li\u003e\n\u003cli\u003eROS 2, Python, OpenCV; sorting, tracking, autonomous patrolling and multimodal LLM projects\u003c\/li\u003e\n\u003cli\u003e7.4 V 2200 mAh LiPo battery with protection board, about 60 minutes runtime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit\u003c\/h3\u003e\u003cp\u003eThis is the \u003cstrong\u003eStandard Kit\u003c\/strong\u003e. Hiwonder's Advanced Kit adds the WonderEcho Pro AI voice box for speech recognition and voice control – ask us if you want that version.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/landerpi\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Mecanum chassis","offer_id":55511304929607,"sku":"HW-LANDERPI-STD-MEC-NOPI","price":9999.0,"currency_code":"SEK","in_stock":true},{"title":"Ackermann chassis","offer_id":55511304962375,"sku":"HW-LANDERPI-STD-ACK-NOPI","price":9999.0,"currency_code":"SEK","in_stock":true},{"title":"Tank chassis","offer_id":55511304995143,"sku":"HW-LANDERPI-STD-TANK-NOPI","price":10439.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/LanderPi_e99dcd27-b1b9-4478-b91b-acb0db06bcfd.png?v=1792605207"},{"product_id":"hiwonder-spiderpi","title":"Hiwonder SpiderPi — AI Vision Hexapod Robot with Raspberry Pi 5 (4 GB)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eSpiderPi is a six-legged walking robot built on a Raspberry Pi 5 (4 GB, included). Its legs are driven by 20 kg·cm 11.1 V high-voltage serial bus servos, and an HD wide-angle camera on a 2DOF mount gives it vision for tracking, line following and tag recognition. It is a good platform for learning hexapod gaits and body-attitude control alongside machine vision and OpenCV in Python.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHexapod with 20 kg·cm high-voltage intelligent serial bus servos\u003c\/li\u003e\n\u003cli\u003eHD wide-angle camera on a 2DOF mount, manual focus\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 5 (4 GB) included\u003c\/li\u003e\n\u003cli\u003eOpenCV projects: target tracking, line following (black, white and red lines), tag recognition\u003c\/li\u003e\n\u003cli\u003eIntelligent transport: judges the distance to an object and switches gait to carry it to a target\u003c\/li\u003e\n\u003cli\u003e11.1 V 2500 mAh lithium battery; Python, app and PC control\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/spiderpi\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and \u003ca href=\"https:\/\/docs.hiwonder.com\/projects\/SpiderPi\/en\/latest\/\" target=\"_blank\" rel=\"noopener\"\u003eSpiderPi tutorials\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Standard Kit with Raspberry Pi 5 (4 GB)","offer_id":55511305060679,"sku":"HW-SPIDERPI-STD-PI5-4GB","price":9959.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/Beauty_720b043a-3c39-43d2-9fea-69a1043ee2d9.png?v=1792605207"},{"product_id":"hiwonder-rosorin","title":"Hiwonder ROSOrin — ROS2 AI Robot Car with LiDAR \u0026 3D Depth Camera, Jetson Orin Nano Super (8 GB)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eROSOrin is Hiwonder's current ROS 2 robot car platform, built for SLAM, navigation and AI vision. It carries an STL-19P D500 TOF LiDAR for mapping, path planning and dynamic obstacle avoidance, and an Aurora 930 Pro 3D depth camera for depth processing and 3D perception. YOLO, MediaPipe and OpenCV are set up for object detection, face recognition and gesture control, and the course material covers multimodal large AI models and the OpenClaw agent framework. The controller is an NVIDIA Jetson Orin Nano Super (8 GB), which runs the AI models on board.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMecanum-wheel chassis with 1:90 encoder motors; modular design (Hiwonder also offers Ackermann and differential-drive versions)\u003c\/li\u003e\n\u003cli\u003eSTL-19P D500 TOF LiDAR for SLAM mapping and navigation\u003c\/li\u003e\n\u003cli\u003eAurora 930 Pro 3D depth camera\u003c\/li\u003e\n\u003cli\u003eBuilt-in 11.1 V 6000 mAh lithium battery\u003c\/li\u003e\n\u003cli\u003eROS 2, Python; YOLO, MediaPipe, OpenCV; multimodal LLM and OpenClaw projects\u003c\/li\u003e\n\u003cli\u003eController included: NVIDIA Jetson Orin Nano Super (8 GB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit\u003c\/h3\u003e\u003cp\u003eThis is the \u003cstrong\u003eStandard Kit\u003c\/strong\u003e with the controller included.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/rosorin\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and \u003ca href=\"https:\/\/docs.hiwonder.com\/projects\/ROSOrin\/en\/jetson-orin-nano-version\/\" target=\"_blank\" rel=\"noopener\"\u003eROSOrin tutorials\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Jetson Orin Nano Super (8 GB)","offer_id":55511315218759,"sku":"HW-ROSORIN-STD-ORIN-8GB","price":17139.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ROSOrin_c2fc9eec-e9f6-4e73-a271-80c40cb15437.png?v=1792605255"},{"product_id":"hiwonder-jetrover","title":"Hiwonder JetRover — ROS Robot Car with 6DOF Arm, LiDAR \u0026 Depth Camera, Jetson Orin Nano Super (8 GB)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eJetRover is Hiwonder's flagship composite ROS robot: a mobile chassis with a 6DOF robotic arm, a 3D depth camera at the end of the arm and a LiDAR for SLAM, all running on an NVIDIA Jetson Orin Nano Super (8 GB, included). It maps and navigates a room, plans paths and avoids obstacles, then recognises, tracks and picks up objects with the arm. It supports both ROS 1 and ROS 2, and the course material includes multimodal large AI model projects. Choose mecanum, Ackermann or tank chassis.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6DOF robotic arm with high-torque high-voltage bus servos\u003c\/li\u003e\n\u003cli\u003e3D depth camera at the end of the arm for first-person recognition and grasping\u003c\/li\u003e\n\u003cli\u003eLiDAR SLAM mapping, path planning, fixed-point navigation and dynamic obstacle avoidance\u003c\/li\u003e\n\u003cli\u003eNVIDIA Jetson Orin Nano Super (8 GB) included; dual-controller design with a separate motion controller\u003c\/li\u003e\n\u003cli\u003eROS 1 and ROS 2, Python; AI vision and multimodal LLM projects\u003c\/li\u003e\n\u003cli\u003eRobot weight about 4.3–5.5 kg depending on chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit\u003c\/h3\u003e\u003cp\u003eThis is the \u003cstrong\u003eStandard Kit\u003c\/strong\u003e. Hiwonder's Advanced and Ultimate kits add more sensors and accessories – ask us if you need one of those.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/jetrover\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and \u003ca href=\"https:\/\/docs.hiwonder.com\/projects\/JetRover\/en\/jetson-orin-nano\/\" target=\"_blank\" rel=\"noopener\"\u003eJetRover tutorials\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Mecanum chassis","offer_id":55511315415367,"sku":"HW-JETROVER-STD-ORIN8-MEC","price":24759.0,"currency_code":"SEK","in_stock":false},{"title":"Ackermann chassis","offer_id":55511315448135,"sku":"HW-JETROVER-STD-ORIN8-ACK","price":24759.0,"currency_code":"SEK","in_stock":false},{"title":"Tank chassis","offer_id":55511315480903,"sku":"HW-JETROVER-STD-ORIN8-TANK","price":24759.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/JetRover_-1_5fa777de-b99b-4f65-a6dc-824f0cc527ae.png?v=1792605257"},{"product_id":"hiwonder-jetarm","title":"Hiwonder JetArm — ROS 3D Vision Robot Arm with Jetson Orin Nano Super (8 GB)","description":"\u003cp\u003e\u003cstrong\u003eOrder-on-demand:\u003c\/strong\u003e ordered from Hiwonder when you place your order and shipped to you from Kalmar. Gadwave is the EU importer, so no customs paperwork or import fees on your side.\u003c\/p\u003e\u003cp\u003eJetArm is an all-metal desktop robot arm for 3D vision and AI grasping, powered by an NVIDIA Jetson Orin Nano Super (8 GB, included). A 3D depth camera at the end of the arm combines colour and depth (RGB+D) to recognise, track and pick up objects of different shapes. YOLOv11 runs on board for real-time multi-object detection, and you can train your own models and accelerate them with TensorRT. It runs ROS 1 and ROS 2, and the base has expansion ports for Hiwonder's sliding rail and mecanum chassis.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll-metal, anodised arm on an industrial bearing base; servo wiring routed inside the body\u003c\/li\u003e\n\u003cli\u003e3D depth camera at the end of the arm for RGB+D recognition and grasping\u003c\/li\u003e\n\u003cli\u003eYOLOv11 object detection, custom model training and TensorRT acceleration\u003c\/li\u003e\n\u003cli\u003eColour sorting, waste sorting and target tracking projects; multimodal LLM projects\u003c\/li\u003e\n\u003cli\u003eNVIDIA Jetson Orin Nano Super (8 GB) included; ROS 1 and ROS 2, Python\u003c\/li\u003e\n\u003cli\u003eExpansion ports for Hiwonder sliding rail and mecanum chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit\u003c\/h3\u003e\u003cp\u003eThis is the \u003cstrong\u003eStandard Kit\u003c\/strong\u003e. Hiwonder's Advanced and Ultimate kits add more accessories – ask us if you need one of those.\u003c\/p\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.hiwonder.com\/products\/jetarm\" target=\"_blank\" rel=\"noopener\"\u003eHiwonder product page\u003c\/a\u003e and \u003ca href=\"https:\/\/wiki.hiwonder.com\/projects\/JetArm\/en\/jetarm-orin-nano\/\" target=\"_blank\" rel=\"noopener\"\u003eJetArm tutorials\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Hiwonder Technology, Shenzhen. Importer: Gadwave \/ Arnvak AB, Kalmar, Sweden. Not a toy – intended for education and development, 14+.\u003c\/p\u003e","brand":"Hiwonder","offers":[{"title":"Standard Kit with Jetson Orin Nano Super (8 GB)","offer_id":55511315513671,"sku":"HW-JETARM-STD-ORIN-8GB","price":17619.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/JetArm_0695412e-1290-443a-bf82-7737a7257552.png?v=1792605256"},{"product_id":"slamtec-rplidar-c1-360-dtof-laser-scanner-12-m-range-ip54-for-ros-raspberry-pi-and-jetson","title":"SLAMTEC RPLIDAR C1 — 360° DTOF Laser Scanner, 12 m Range, IP54, for ROS, Raspberry Pi and Jetson","description":"\u003cp\u003eThe RPLIDAR C1 is a compact 360-degree 2D laser scanner from SLAMTEC that measures distance by direct time of flight (DTOF). It scans the room around it ten times per second and outputs a ring of distance and angle points, which is what SLAM, mapping and obstacle avoidance on a mobile robot need. It is supported by the SLAMTEC SDK and by ROS 1 and ROS 2 drivers, and can be read from a PC, Raspberry Pi or Jetson.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: RPLIDAR C1 (C1M1)\u003c\/li\u003e\n\u003cli\u003eMeasuring principle: DTOF, 360° 2D scanning\u003c\/li\u003e\n\u003cli\u003eRange: 0.05–12 m on white targets (70 % reflectivity), 0.05–6 m on black targets (10 %)\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±30 mm, resolution 15 mm\u003c\/li\u003e\n\u003cli\u003eSample rate: 5,000 samples\/s\u003c\/li\u003e\n\u003cli\u003eScan frequency: 8–12 Hz, 10 Hz typical\u003c\/li\u003e\n\u003cli\u003eAngular resolution: 0.72°\u003c\/li\u003e\n\u003cli\u003eInterface: TTL UART, 460800 baud, 3.3 V logic, XH2.54 5-pin connector\u003c\/li\u003e\n\u003cli\u003eSupply: 5 V, approx. 230 mA running (800 mA at start-up)\u003c\/li\u003e\n\u003cli\u003eLaser: 905 nm, IEC 60825 Class 1 (eye-safe)\u003c\/li\u003e\n\u003cli\u003eAmbient light resistance: 40,000 lux\u003c\/li\u003e\n\u003cli\u003eProtection: IP54\u003c\/li\u003e\n\u003cli\u003eOperating temperature: −10 to +40 °C\u003c\/li\u003e\n\u003cli\u003eDimensions: 55.6 × 55.6 × 41.3 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 110 g\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (Seeed): 101090061\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe sensor talks UART; to connect it to a computer over USB, use a USB-to-UART adapter board.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"SLAMTEC","offers":[{"title":"Default Title","offer_id":55518112186695,"sku":"SEEED-101090061","price":1199.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-101090061-rplidar-c1m1-r2-portable-tof-laser-scanner-kit---12m-range-45font_ea0bbc60-c88e-42cb-9058-b3f0825bb02b.jpg?v=1792929345"},{"product_id":"orbbec-gemini-2-active-stereo-3d-depth-camera-with-rgb-and-imu-usb-c-for-ros-raspberry-pi-and-jetson","title":"Orbbec Gemini 2 — Active Stereo 3D Depth Camera with RGB and IMU, USB-C, for ROS, Raspberry Pi and Jetson","description":"\u003cp\u003eThe Gemini 2 is a compact active stereo depth camera from Orbbec. Two global-shutter IR sensors and an IR projector produce a depth image, a 1080p colour camera adds RGB, and a built-in 6-axis IMU gives motion data. Everything runs over one USB-C cable that also powers the camera. Typical uses are robot navigation and obstacle detection, pick-and-place with a robot arm, people counting and 3D scanning. It works with the Orbbec SDK and as a UVC camera, and Seeed documents its use with ROS and ORB-SLAM3 on Jetson.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDepth technology: active stereo IR, 50 mm baseline, global shutter\u003c\/li\u003e\n\u003cli\u003eDepth range: 0.15–10 m (best 0.2–5 m)\u003c\/li\u003e\n\u003cli\u003eDepth resolution: 1280 × 800 at 30 fps, 640 × 400 at 60 fps\u003c\/li\u003e\n\u003cli\u003eDepth field of view: 91° H × 66° V\u003c\/li\u003e\n\u003cli\u003eDepth accuracy: under 2 % at 2 m\u003c\/li\u003e\n\u003cli\u003eRGB: 1920 × 1080 at 30 fps, 1280 × 720 at 60 fps, 86° H × 55° V (16:9), YUYV\/MJPEG\u003c\/li\u003e\n\u003cli\u003eIMU: 6-axis\u003c\/li\u003e\n\u003cli\u003eInterface: USB 3.0 Type-C, 8-pin multi-camera sync port\u003c\/li\u003e\n\u003cli\u003ePower: 5 V via USB-C, at least 1.5 A, average under 2.5 W\u003c\/li\u003e\n\u003cli\u003eEnvironment: indoor and semi-outdoor, 0 to 40 °C, IP5X\u003c\/li\u003e\n\u003cli\u003eMounting: 1\/4\"-20 tripod thread, 2 × M3\u003c\/li\u003e\n\u003cli\u003eDimensions: 90 × 25 × 30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 98 g\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (Seeed): 101090144\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × Gemini 2 camera\u003c\/li\u003e\n\u003cli\u003e1 × USB-C to USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTripod not included. A USB 3.0 port is recommended for full resolution.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"Orbbec","offers":[{"title":"Default Title","offer_id":55518113857863,"sku":"SEEED-101090144","price":4149.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/0-101090144--orbbec-gemini-2-3d-camera_1d149832-5d4f-479c-90c0-ab01dd77be98.jpg?v=1792929346"},{"product_id":"fashionstar-starai-viola-violin-7-dof-leader-follower-robot-arm-set-for-lerobot-and-ros-2-pre-assembled","title":"Fashionstar StarAi Viola + Violin — 7-DoF Leader\/Follower Robot Arm Set for LeRobot and ROS 2, Pre-Assembled","description":"\u003cp\u003eA pre-assembled pair of 6+1 degree-of-freedom robot arms for teleoperation and imitation learning: the Violin is the leader arm you move by hand, the Viola is the follower arm that copies it and carries the gripper. Recorded demonstrations can be used to train policies in Hugging Face LeRobot. The Viola follower is also supported in ROS 2, MoveIt and Gazebo. Compared with SO-ARM-class kits it has a longer reach, a payload of 300 g and a wrist that holds its position.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfiguration: Violin leader arm + Viola follower arm, both pre-assembled\u003c\/li\u003e\n\u003cli\u003eDegrees of freedom: 6 + 1 (gripper) per arm, wrist rotation\u003c\/li\u003e\n\u003cli\u003eReach: 470 mm, span 940 mm\u003c\/li\u003e\n\u003cli\u003ePayload (Viola): 300 g at 70 % reach\u003c\/li\u003e\n\u003cli\u003eRepeatability (Viola): 2 mm\u003c\/li\u003e\n\u003cli\u003eServos per arm: 2 × RX8-U50H-M, 4 × RA8-U25H-M, 1 × RA8-U26H-M\u003c\/li\u003e\n\u003cli\u003eGripper: parallel gripper (Viola), wrist camera mount\u003c\/li\u003e\n\u003cli\u003eLeader arm: holds any position, handle button\u003c\/li\u003e\n\u003cli\u003eCommunication: UC-01 communication hub\u003c\/li\u003e\n\u003cli\u003ePower: 12 V, 120 W per arm\u003c\/li\u003e\n\u003cli\u003eSoftware: LeRobot (both arms); ROS 2, MoveIt, Gazebo (Viola)\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (Seeed): 114090081\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe arms need a 12 V supply rated for 120 W (10 A). The variant with power supply includes Seeed's 12 V 10 A adapter. A computer with LeRobot or ROS 2 and a camera are needed for training and are not included.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cp\u003ePre-order item, ordered from Seeed Studio when you place your order. Ships to Sweden and the EU.\u003c\/p\u003e","brand":"Fashionstar","offers":[{"title":"Without power supply","offer_id":55518117331271,"sku":"SEEED-114090081","price":14399.0,"currency_code":"SEK","in_stock":false},{"title":"With 12 V 10 A power supply","offer_id":55518117364039,"sku":"SEEED-114090081-PSU","price":14999.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/image-viola-1_b6251501-6382-4a23-8a87-f1d8d7a90fd5.png?v=1792929346"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/collections\/299A75FA14353575AEED9FEDE990E5D6.png?v=1792924107","url":"https:\/\/gadwave.com\/collections\/robotics.oembed?page=2","provider":"Gadwave","version":"1.0","type":"link"}