{"title":"ESP32 \u0026 Microcontrollers","description":"\u003cp\u003eESP32 development boards and microcontrollers from Seeed Studio, Espressif and Raspberry Pi: XIAO, DevKitC, Pico and more.\u003c\/p\u003e","products":[{"product_id":"raspberry-pi-pico-2-pico-2-w","title":"Raspberry Pi Pico 2 \/ Pico 2 W","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi's second-generation microcontroller board, built on the RP2350. Faster, more RAM and more flash than the original Pico, with the same footprint and the same drag-and-drop programming.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor speed 150 MHz: RP2350 with dual Arm Cortex-M33 or dual RISC-V Hazard3 cores (selectable)\u003c\/li\u003e\n\u003cli\u003eInstalled memory: 520 KB SRAM plus 4 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eNo video output – a microcontroller board, not a Linux computer\u003c\/li\u003e\n\u003cli\u003e26 multifunction GPIO, 3 analogue inputs, 2× UART, 2× SPI, 2× I2C, 24 PWM channels, 12 PIO state machines\u003c\/li\u003e\n\u003cli\u003eMicro USB (USB 1.1 host\/device), 1.8–5.5 V input, low-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003ePico 2 W adds 2.4 GHz Wi-Fi 4 and Bluetooth 5.2 via the Infineon CYW43439\u003c\/li\u003e\n\u003cli\u003eProgrammable in C\/C++ and MicroPython; flash by dragging a UF2 file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePico 2 H ships with the 40 header pins pre-soldered, ready for a breadboard. Pico 2 W ships without headers.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Pico 2 H (headers soldered)","offer_id":54866674843975,"sku":"RPI-PICO2H-SC1632","price":89.0,"currency_code":"SEK","in_stock":true},{"title":"Pico 2 W (Wi-Fi + Bluetooth, no headers)","offer_id":54866674876743,"sku":"RPI-PICO2W-SC1633","price":95.0,"currency_code":"SEK","in_stock":true},{"title":"Pico 2 WH (Wi-Fi + Bluetooth, headers soldered)","offer_id":54873727369543,"sku":"RPI-PICO2WH-SC1634","price":109.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/pico-2.webp?v=1791990551"},{"product_id":"raspberry-pi-pico-pico-h-pico-w","title":"Raspberry Pi Pico \/ Pico H \/ Pico W","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eThe original Raspberry Pi Pico, built on the RP2040. Still the cheapest way into microcontroller programming with MicroPython or C, and the board most tutorials and kits are written for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor speed 133 MHz: RP2040 with dual Arm Cortex-M0+ cores\u003c\/li\u003e\n\u003cli\u003eInstalled memory: 264 KB SRAM plus 2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eNo video output – a microcontroller board, not a Linux computer\u003c\/li\u003e\n\u003cli\u003e26 multifunction GPIO, 3 analogue inputs, 2× UART, 2× SPI, 2× I2C, 16 PWM channels, 8 PIO state machines\u003c\/li\u003e\n\u003cli\u003eMicro USB (USB 1.1 host\/device), 1.8–5.5 V input, low-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003ePico W adds 2.4 GHz Wi-Fi 4 and Bluetooth 5.2 via the Infineon CYW43439\u003c\/li\u003e\n\u003cli\u003eProgrammable in C\/C++ and MicroPython; flash by dragging a UF2 file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePico H ships with the 40 header pins pre-soldered and a 3-pin debug connector. Pico and Pico W ship without headers.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Pico (no headers)","offer_id":54867407470919,"sku":"RPI-PICO","price":59.0,"currency_code":"SEK","in_stock":true},{"title":"Pico H (headers soldered)","offer_id":54867407503687,"sku":"RPI-PICO-H","price":69.0,"currency_code":"SEK","in_stock":true},{"title":"Pico W (Wi-Fi + Bluetooth, no headers)","offer_id":54867407536455,"sku":"RPI-PICO-W","price":79.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/pico-rp2040.jpg?v=1788422310"},{"product_id":"seeed-studio-xiao-esp32-c3-s3-s3-sense","title":"Seeed Studio XIAO ESP32 (C3 \/ S3 \/ S3 Sense)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eSeeed Studio's thumb-sized XIAO boards pack an ESP32 with Wi-Fi and Bluetooth into a 21 × 17.8 mm module with USB-C, a built-in Li-ion charging circuit and castellated pads for surface mounting. Choose the ESP32-C3 (RISC-V, the budget all-rounder), the ESP32-S3 (dual-core with 8 MB PSRAM for demanding projects) or the ESP32-S3 Sense, which adds a plug-in camera, a digital microphone and a microSD slot for vision and audio projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eXIAO ESP32C3:\u003c\/strong\u003e ESP32-C3 RISC-V single-core 160 MHz, 400 KB SRAM, 4 MB flash, Wi-Fi 4 and Bluetooth 5 LE, external antenna included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXIAO ESP32S3:\u003c\/strong\u003e ESP32-S3 dual-core 240 MHz, 8 MB PSRAM, 8 MB flash, Wi-Fi 4 and Bluetooth 5 LE, external antenna included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXIAO ESP32S3 Sense:\u003c\/strong\u003e as ESP32S3, plus detachable camera module (OV3660 in current production), digital microphone and microSD slot\u003c\/li\u003e\n\u003cli\u003eAll models: USB-C, Li-ion battery charging, 11 GPIO, 21 × 17.8 mm; programmable with Arduino IDE, ESP-IDF, MicroPython and CircuitPython\u003c\/li\u003e\n\u003cli\u003ePin headers pre-soldered\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"XIAO ESP32C3","offer_id":54873709216071,"sku":"SEEED-102010633","price":99.0,"currency_code":"SEK","in_stock":true},{"title":"XIAO ESP32S3","offer_id":54873709248839,"sku":"SEEED-102010634","price":149.0,"currency_code":"SEK","in_stock":true},{"title":"XIAO ESP32S3 Sense (camera + mic)","offer_id":54873709281607,"sku":"SEEED-102010635","price":339.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2-102010633-seeed-studio-xiao-esp32c3-_pre-soldered_-45font.jpg?v=1791991283"},{"product_id":"seeed-studio-xiao-expansion-base-oled-rtc-microsd-grove","title":"Seeed Studio XIAO Expansion Base (OLED, RTC, microSD, Grove)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe official carrier board for the Seeed Studio XIAO family. Plug any XIAO (ESP32C3, ESP32S3, RP2040, SAMD21, nRF52840) into the socket and you get a 0.96\" OLED display, a real-time clock with battery holder, a microSD slot, a buzzer, user and reset buttons and a set of Grove connectors, so sensors and actuators connect without soldering. Ideal for prototyping and classroom use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0.96\" OLED display (SSD1306, I2C)\u003c\/li\u003e\n\u003cli\u003eReal-time clock (PCF8563) with coin-cell holder\u003c\/li\u003e\n\u003cli\u003emicroSD card slot, passive buzzer, user button, reset button\u003c\/li\u003e\n\u003cli\u003eGrove connectors for I2C, UART and analog\/digital I\/O\u003c\/li\u003e\n\u003cli\u003eLi-ion battery connector with charging via the XIAO; USB-C and 5 V servo header\u003c\/li\u003e\n\u003cli\u003eCompatible with all XIAO boards (XIAO not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":54873709805895,"sku":"SEEED-103030356","price":299.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/zheng1.jpg?v=1788454371"},{"product_id":"espressif-esp32-devkitc-official-development-board","title":"Espressif ESP32-S3 \/ ESP32-C6 DevKitC-1 (official development board)","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eEspressif's own reference development boards: breadboard-friendly, every pin broken out, and the exact boards that Espressif's documentation and examples are written for. Choose the ESP32-S3 for maximum performance and memory, or the ESP32-C6 for Wi-Fi 6 and Zigbee\/Thread in Matter-ready smart-home projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3-DevKitC-1-N8R8:\u003c\/strong\u003e ESP32-S3-WROOM-1 module, dual-core 240 MHz, 8 MB flash, 8 MB octal PSRAM, Wi-Fi 4 and Bluetooth 5 LE; two USB-C ports (UART bridge and native USB-OTG)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-C6-DevKitC-1-N8:\u003c\/strong\u003e ESP32-C6-WROOM-1 module, RISC-V 160 MHz, 8 MB flash, Wi-Fi 6, Bluetooth 5.3 LE, Zigbee and Thread (IEEE 802.15.4); two USB-C ports\u003c\/li\u003e\n\u003cli\u003eBoth: 5 V via USB-C, 3.3 V regulator, boot and reset buttons, RGB LED, pin headers pre-soldered\u003c\/li\u003e\n\u003cli\u003eProgrammable with ESP-IDF, Arduino IDE, PlatformIO and MicroPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Espressif","offers":[{"title":"ESP32-S3-DevKitC-1-N8R8 (8 MB flash + 8 MB PSRAM)","offer_id":54873710854471,"sku":"ESP32S3DEVKC-8R8","price":239.0,"currency_code":"SEK","in_stock":false},{"title":"ESP32-C6-DevKitC-1-N8 (Wi-Fi 6, Zigbee\/Thread)","offer_id":54873710887239,"sku":"ESP32C6-DEVKITC1N8","price":229.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32-s3-devkitc-1-v1.1-isometric.png?v=1788454372"},{"product_id":"elecrow-crowpanel-advance-2-8-esp32-s3-hmi-touch-display-320-240","title":"Elecrow CrowPanel Advance 2.8\" — ESP32-S3 HMI Touch Display (320×240)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 2.8\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 320×240, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.8\" IPS panel, 320×240, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eSPI display, compact size – ideal for a small status panel or Meshtastic display\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 2.8\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919438958919,"sku":"ELC-CROWPANEL-ADV-2.8","price":439.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_2.8inch_display.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-3-5-esp32-s3-hmi-touch-display-480-320","title":"Elecrow CrowPanel Advance 3.5\" — ESP32-S3 HMI Touch Display (480×320)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 3.5\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 480×320, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.5\" IPS panel, 480×320, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eSPI display with ILI9488 driver\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 3.5\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439221063,"sku":"ELC-CROWPANEL-ADV-3.5","price":539.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_3.5inch_display.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-4-3-esp32-s3-hmi-touch-display-800-480","title":"Elecrow CrowPanel Advance 4.3\" — ESP32-S3 HMI Touch Display (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 4.3\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 800×480, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4.3\" IPS panel, 800×480, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eRGB display, driver ST7262\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 4.3\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439384903,"sku":"ELC-CROWPANEL-ADV-4.3","price":589.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_4.3inch_display1_1.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-5-esp32-s3-hmi-touch-display-800-480","title":"Elecrow CrowPanel Advance 5\" — ESP32-S3 HMI Touch Display (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 5\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 800×480, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5\" IPS panel, 800×480, capacitive touch, 178° viewing angle, 400 cd\/m²\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eRGB display, driver ST7262\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 5\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/pub\/wiki\/CrowPanel_Advance_5.0-HMI_ESP32_AI_Display.html\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439515975,"sku":"ELC-CROWPANEL-ADV-5","price":599.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_5inch_display_1.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-7-esp32-s3-hmi-touch-display-800-480","title":"Elecrow CrowPanel Advance 7\" — ESP32-S3 HMI Touch Display (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 7\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 800×480, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7\" IPS panel, 800×480, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eRGB display – the most popular size for Home Assistant wall panels\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 7\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439679815,"sku":"ELC-CROWPANEL-ADV-7","price":649.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_7inch_display.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-5-esp32-p4-hmi-ai-touch-display-with-wi-fi-6-800-480","title":"Elecrow CrowPanel Advance 5\" ESP32-P4 — HMI AI Touch Display with Wi-Fi 6 (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 5\" ESP32-P4 is a ready-to-use HMI touch display built around Espressif's ESP32-P4: a 400 MHz dual-core RISC-V processor with 32 MB PSRAM and 16 MB Flash, paired with an ESP32-C6 module for Wi-Fi 6 and Bluetooth 5.3. The IPS capacitive touchscreen runs at 800×480 over MIPI-DSI, so animations and video decode are smooth. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5\" IPS panel, 800×480, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-P4 — 400 MHz dual-core RISC-V, 32 MB PSRAM, 16 MB Flash, hardware graphics and video acceleration\u003c\/li\u003e\n\u003cli\u003eESP32-C6 wireless module — Wi-Fi 6 and Bluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 5\" ESP32-P4 display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamera not included.\u003c\/strong\u003e The camera shown in some of the pictures is an optional 2 MP add-on; this listing is the version without camera.\u003c\/p\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439909191,"sku":"ELC-CROWPANEL-ADV-P4-5","price":649.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/crowpanel_esp32-p4_5inch_hmi_display_1.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-7-esp32-p4-hmi-ai-touch-display-with-wi-fi-6-1024-600","title":"Elecrow CrowPanel Advance 7\" ESP32-P4 — HMI AI Touch Display with Wi-Fi 6 (1024×600)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 7\" ESP32-P4 is a ready-to-use HMI touch display built around Espressif's ESP32-P4: a 400 MHz dual-core RISC-V processor with 32 MB PSRAM and 16 MB Flash, paired with an ESP32-C6 module for Wi-Fi 6 and Bluetooth 5.3. The IPS capacitive touchscreen runs at 1024×600 over MIPI-DSI, so animations and video decode are smooth. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7\" IPS panel, 1024×600, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-P4 — 400 MHz dual-core RISC-V, 32 MB PSRAM, 16 MB Flash, hardware graphics and video acceleration\u003c\/li\u003e\n\u003cli\u003eESP32-C6 wireless module — Wi-Fi 6 and Bluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 7\" ESP32-P4 display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamera not included.\u003c\/strong\u003e The camera shown in some of the pictures is an optional 2 MP add-on; this listing is the version without camera.\u003c\/p\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919440433479,"sku":"ELC-CROWPANEL-ADV-P4-7","price":829.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32-p4_7inch_display_1_2.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-10-1-esp32-p4-hmi-ai-touch-display-with-wi-fi-6-1024-600","title":"Elecrow CrowPanel Advance 10.1\" ESP32-P4 — HMI AI Touch Display with Wi-Fi 6 (1024×600)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 10.1\" ESP32-P4 is the full-size wall panel in the series, built around Espressif's ESP32-P4: a 400 MHz dual-core RISC-V processor with 32 MB PSRAM and 16 MB Flash, paired with an ESP32-C6 module for Wi-Fi 6 and Bluetooth 5.3. The IPS capacitive touchscreen runs at 1024×600 over MIPI-DSI, so animations and video decode are smooth. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10.1\" IPS panel, 1024×600, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-P4 — 400 MHz dual-core RISC-V, 32 MB PSRAM, 16 MB Flash, hardware graphics and video acceleration\u003c\/li\u003e\n\u003cli\u003eESP32-C6 wireless module — Wi-Fi 6 and Bluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 10.1\" ESP32-P4 display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamera not included.\u003c\/strong\u003e The camera shown in some of the pictures is an optional 2 MP add-on; this listing is the version without camera.\u003c\/p\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919440630087,"sku":"ELC-CROWPANEL-ADV-P4-10.1","price":849.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32-p4_10.1inch_hmi_display_1.jpg?v=1791913800"},{"product_id":"seeed-studio-xiao-nrf52840","title":"Seeed Studio XIAO nRF52840","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized Bluetooth development board built on the Nordic nRF52840. Suited to wearables, battery-powered sensors and other low-power wireless projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003e11 GPIO with PWM, 6 analog inputs, UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm, components on one side for surface mounting\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino, MicroPython and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219718291783,"sku":"SEEED-102010448","price":199.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219718324551,"sku":"SEEED-102010631","price":219.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2-102010448-seeed-studio-xiao-nrf52840-45font-logo.jpg?v=1790780756"},{"product_id":"seeed-studio-xiao-nrf52840-sense-pre-soldered-headers","title":"Seeed Studio XIAO nRF52840 Sense (pre-soldered headers)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO nRF52840 with a motion sensor and microphone added, delivered with headers already soldered. A common choice for TinyML projects such as gesture and sound recognition.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003eOn-board 6-axis IMU (LSM6DS3TR-C) and PDM microphone\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003e11 GPIO with PWM, 6 analog inputs, UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino, MicroPython and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219718684999,"sku":"SEEED-102010632","price":339.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010632-seeed-studio-xiao-nrf52840-sense-_pre-soldered.jpg?v=1790780757"},{"product_id":"seeed-studio-xiao-nrf52840-plus","title":"Seeed Studio XIAO nRF52840 Plus","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO nRF52840 with more pins. Extra pads on the underside bring the total to 20 GPIO while the board keeps the same thumb-sized footprint.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003e20 GPIO in total, with UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino, MicroPython and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219719569735,"sku":"SEEED-102010672","price":209.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010672-seeedstudio-xiao-nrf52840-plus_1.jpg?v=1790780757"},{"product_id":"seeed-studio-xiao-nrf52840-sense-plus","title":"Seeed Studio XIAO nRF52840 Sense Plus","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO nRF52840 Sense with more pins. Motion sensor and microphone on board, and extra pads on the underside for 20 GPIO in total.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003eOn-board 6-axis IMU and PDM microphone\u003c\/li\u003e\n\u003cli\u003e20 GPIO in total, with UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219719733575,"sku":"SEEED-102010694","price":329.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010694-seeedstudio-xiao-nrf52840-sense-plus_1.jpg?v=1790780758"},{"product_id":"seeed-studio-xiao-nrf54l15","title":"Seeed Studio XIAO nRF54L15","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized development board built on Nordic's nRF54L15, the successor generation to the nRF52 series. Made for very low-power Bluetooth, Thread, Zigbee and Matter devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF54L15, Arm Cortex-M33 at 128 MHz with a RISC-V coprocessor\u003c\/li\u003e\n\u003cli\u003e1.5 MB non-volatile memory and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth LE 6.0 including Channel Sounding, plus Thread, Zigbee and Matter\u003c\/li\u003e\n\u003cli\u003eOn-board antenna with connector for an external antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in debug interface over USB-C, no external programmer needed\u003c\/li\u003e\n\u003cli\u003eCharging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eDeveloped with the nRF Connect SDK (Zephyr)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219719831879,"sku":"SEEED-101991421","price":199.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219719864647,"sku":"SEEED-114993696","price":219.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-101991421-xiao-nrf54l14.jpg?v=1790780759"},{"product_id":"seeed-studio-xiao-nrf54l15-sense","title":"Seeed Studio XIAO nRF54L15 Sense","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO nRF54L15 with a motion sensor and microphone added, for low-power sensing and TinyML on Nordic's newest wireless platform.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF54L15, Arm Cortex-M33 at 128 MHz with a RISC-V coprocessor\u003c\/li\u003e\n\u003cli\u003e1.5 MB non-volatile memory and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth LE 6.0 including Channel Sounding, plus Thread, Zigbee and Matter\u003c\/li\u003e\n\u003cli\u003eOn-board 6-axis IMU and digital microphone\u003c\/li\u003e\n\u003cli\u003eOn-board antenna with connector for an external antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in debug interface over USB-C, no external programmer needed\u003c\/li\u003e\n\u003cli\u003eCharging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eDeveloped with the nRF Connect SDK (Zephyr)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219719930183,"sku":"SEEED-101991422","price":319.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219719962951,"sku":"SEEED-114993697","price":339.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-101991422-xiao-nrf54l15-sense.jpg?v=1790780760"},{"product_id":"seeed-studio-xiao-esp32-c5","title":"Seeed Studio XIAO ESP32-C5","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized board built on Espressif's ESP32-C5, and the first XIAO with dual-band Wi-Fi 6. Useful where the 2.4 GHz band is crowded.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEspressif ESP32-C5, RISC-V processor at up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e8 MB flash and 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003eWi-Fi 6 on both 2.4 GHz and 5 GHz\u003c\/li\u003e\n\u003cli\u003eBluetooth 5 Low Energy\u003c\/li\u003e\n\u003cli\u003eIEEE 802.15.4 radio for Zigbee and Thread\u003c\/li\u003e\n\u003cli\u003eFPC antenna included, connected via U.FL\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eSupported in Arduino and ESP-IDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219724648775,"sku":"SEEED-100010048","price":139.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219724681543,"sku":"SEEED-100093057","price":159.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-100010048-seeed-studio-xiao-esp32c5.jpg?v=1790780811"},{"product_id":"seeed-studio-xiao-esp32-c6-pre-soldered-headers","title":"Seeed Studio XIAO ESP32-C6 (pre-soldered headers)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized ESP32-C6 board with Wi-Fi 6, Bluetooth, Zigbee and Thread in one chip, delivered with headers already soldered. A good fit for Matter and smart-home devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEspressif ESP32-C6 with two RISC-V cores: 160 MHz high-performance and 20 MHz low-power\u003c\/li\u003e\n\u003cli\u003e2.4 GHz Wi-Fi 6 and Bluetooth 5 Low Energy\u003c\/li\u003e\n\u003cli\u003eIEEE 802.15.4 radio for Zigbee and Thread, Matter compatible\u003c\/li\u003e\n\u003cli\u003e4 MB flash\u003c\/li\u003e\n\u003cli\u003eOn-board antenna plus U.FL connector for an external antenna\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eSupported in Arduino, ESP-IDF and MicroPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219724747079,"sku":"SEEED-102010636","price":119.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010636-seeed-studio-xiao-esp32c6-_pre-soldered.jpg?v=1790780812"},{"product_id":"seeed-studio-grove-base-for-xiao","title":"Seeed Studio Grove Base for XIAO","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eExpansion board that adds Grove connectors to any XIAO board, so sensors and modules plug in without soldering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSocket for one XIAO board\u003c\/li\u003e\n\u003cli\u003e8 Grove connectors, including I2C and UART\u003c\/li\u003e\n\u003cli\u003eOn-board battery management for charging a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eFits all boards in the XIAO series\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219725238599,"sku":"SEEED-103020312","price":79.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/xiao_-preview-25.png?v=1790780814"},{"product_id":"seeed-studio-xiao-rp2040","title":"Seeed Studio XIAO RP2040","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized development board built on the Raspberry Pi RP2040. A low-cost way into MicroPython and CircuitPython in the XIAO format.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRaspberry Pi RP2040, dual-core Arm Cortex-M0+ at up to 133 MHz\u003c\/li\u003e\n\u003cli\u003e264 KB SRAM and 2 MB on-board flash\u003c\/li\u003e\n\u003cli\u003e11 GPIO with PWM, 4 analog inputs, UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and on-board RGB LED\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino, MicroPython and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219751092551,"sku":"SEEED-102010428","price":79.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219751125319,"sku":"SEEED-102010630","price":99.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010428-seeed-studio-xiao-rp2040-45font_1.jpg?v=1790781020"},{"product_id":"seeed-studio-xiao-rp2350","title":"Seeed Studio XIAO RP2350","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized development board built on the Raspberry Pi RP2350, the successor to the RP2040 with faster cores and more memory.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRaspberry Pi RP2350, dual-core Arm Cortex-M33 at 150 MHz\u003c\/li\u003e\n\u003cli\u003e520 KB SRAM and 2 MB on-board flash\u003c\/li\u003e\n\u003cli\u003e19 GPIO in total, including pads on the underside\u003c\/li\u003e\n\u003cli\u003eUART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C, on-board RGB LED and battery charging support\u003c\/li\u003e\n\u003cli\u003eWorks with MicroPython and the Raspberry Pi Pico C\/C++ SDK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219751158087,"sku":"SEEED-102010550","price":99.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219751190855,"sku":"SEEED-102010637","price":119.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/group_1.jpg?v=1790781021"},{"product_id":"seeed-studio-xiao-samd21","title":"Seeed Studio XIAO SAMD21","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe original XIAO, also known as Seeeduino XIAO. A simple, Arduino-compatible board for small projects that do not need wireless.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMicrochip ATSAMD21G18, Arm Cortex-M0+ at 48 MHz\u003c\/li\u003e\n\u003cli\u003e256 KB flash and 32 KB SRAM\u003c\/li\u003e\n\u003cli\u003e11 GPIO, 10 with PWM, and one DAC output\u003c\/li\u003e\n\u003cli\u003eUART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219751256391,"sku":"SEEED-102010328","price":109.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219751289159,"sku":"SEEED-102010388","price":129.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2-102010328-seeed-studio-xiao-samd21-font-new.jpg?v=1790781021"},{"product_id":"seeed-studio-xiao-mg24","title":"Seeed Studio XIAO MG24","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized board built on the Silicon Labs EFR32MG24, made for low-power Matter, Thread, Zigbee and Bluetooth devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSilicon Labs EFR32MG24, Arm Cortex-M33 at 78 MHz\u003c\/li\u003e\n\u003cli\u003e1536 KB flash and 256 KB RAM, plus 4 MB on-board flash\u003c\/li\u003e\n\u003cli\u003eBluetooth LE 5.3, Zigbee, Thread and Matter\u003c\/li\u003e\n\u003cli\u003e19 GPIO in total, with UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eSupported in Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219751354695,"sku":"SEEED-102010590","price":159.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219751387463,"sku":"SEEED-102010690","price":179.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/new-1-102010590-seeed-studio-xiao-mg24_1.jpg?v=1790781022"},{"product_id":"seeed-studio-xiao-mg24-sense","title":"Seeed Studio XIAO MG24 Sense","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO MG24 with a motion sensor and microphone added, for low-power sensing and TinyML on Matter, Thread, Zigbee or Bluetooth.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSilicon Labs EFR32MG24, Arm Cortex-M33 at 78 MHz\u003c\/li\u003e\n\u003cli\u003e1536 KB flash and 256 KB RAM, plus 4 MB on-board flash\u003c\/li\u003e\n\u003cli\u003eBluetooth LE 5.3, Zigbee, Thread and Matter\u003c\/li\u003e\n\u003cli\u003eOn-board 6-axis IMU and microphone\u003c\/li\u003e\n\u003cli\u003e19 GPIO in total, with UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eSupported in Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219751420231,"sku":"SEEED-102010610","price":219.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219751452999,"sku":"SEEED-102010691","price":239.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010610-seeed-studio-xiao-mg24-sense-45font.jpg?v=1790781023"},{"product_id":"seeed-studio-xiao-ra4m1","title":"Seeed Studio XIAO RA4M1","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized board built on the Renesas RA4M1, the same microcontroller family used in the Arduino Uno R4. Arduino-compatible, with CAN and a 14-bit ADC in the XIAO format.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRenesas RA4M1, Arm Cortex-M4 at 48 MHz\u003c\/li\u003e\n\u003cli\u003e256 KB flash, 32 KB SRAM and 8 KB EEPROM\u003c\/li\u003e\n\u003cli\u003e19 GPIO in total, 14-bit ADC and CAN bus\u003c\/li\u003e\n\u003cli\u003eUART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eWorks with the Arduino IDE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219751485767,"sku":"SEEED-102010551","price":119.0,"currency_code":"SEK","in_stock":true},{"title":"Pre-soldered headers","offer_id":55219751518535,"sku":"SEEED-102010638","price":139.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010551-seeed-studio-xiao-ra4m1.jpg?v=1790781032"},{"product_id":"seeed-studio-xiao-esp32-s3-plus","title":"Seeed Studio XIAO ESP32-S3 Plus","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO ESP32-S3 with more memory and more pins, for projects that outgrow the standard board.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEspressif ESP32-S3, dual-core processor at 240 MHz\u003c\/li\u003e\n\u003cli\u003e2.4 GHz Wi-Fi and Bluetooth 5 Low Energy\u003c\/li\u003e\n\u003cli\u003e16 MB flash and 8 MB PSRAM\u003c\/li\u003e\n\u003cli\u003eExtra pads on the underside for additional GPIO\u003c\/li\u003e\n\u003cli\u003eU.FL connector for an external antenna\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eSupported in Arduino, ESP-IDF and MicroPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219758661959,"sku":"SEEED-102010671","price":159.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010671-seeedstudio-xiao-esp32s3-plus_1.jpg?v=1790781066"},{"product_id":"seeed-studio-grove-shield-for-raspberry-pi-pico","title":"Seeed Studio Grove Shield for Raspberry Pi Pico","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eShield that adds Grove connectors to a Raspberry Pi Pico. The Pico plugs into the female headers and sensors connect with Grove cables.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10 Grove connectors: 3 digital, 3 analog, 2 I2C and 2 UART\u003c\/li\u003e\n\u003cli\u003eSPI header and SWD debug interface\u003c\/li\u003e\n\u003cli\u003ePower switch for 3.3 V or 5 V\u003c\/li\u003e\n\u003cli\u003eFits Raspberry Pi Pico boards with headers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219759087943,"sku":"SEEED-103100142","price":79.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/pico_base_shield_1.png?v=1790781069"}],"url":"https:\/\/gadwave.com\/collections\/esp32-microcontrollers.oembed?page=2","provider":"Gadwave","version":"1.0","type":"link"}