{"title":"Shop all","description":"\u003cp\u003eEvery product in the Gadwave range.\u003c\/p\u003e","products":[{"product_id":"elecrow-thinknode-m1-meshtastic-handheld-with-e-paper-display-gps-868-mhz","title":"Elecrow ThinkNode M1 — Meshtastic Handheld with E-Paper Display \u0026 GPS (868 MHz)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Ships from Kalmar, Sweden. EU 868 MHz version. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA ready-to-use Meshtastic node in a matchbox-sized enclosure. Meshtastic comes pre-installed: pair it with the Meshtastic app over Bluetooth and you are messaging off-grid within minutes. The e-paper screen shows nodes, messages and GPS position and stays readable in direct sunlight.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNordic nRF52840 MCU (Arm Cortex-M4 @ 64 MHz), Bluetooth 5.0\u003c\/li\u003e\n\u003cli\u003eSemtech SX1262 LoRa transceiver, up to +22 dBm, EU 868 MHz\u003c\/li\u003e\n\u003cli\u003eQuectel L76K GNSS: GPS, GLONASS, BeiDou, QZSS\u003c\/li\u003e\n\u003cli\u003e1.54\" e-paper display, 200 × 200 px, adjustable backlight\u003c\/li\u003e\n\u003cli\u003e1200 mAh rechargeable Li-ion battery, over 48 hours per charge\u003c\/li\u003e\n\u003cli\u003eRP-SMA antenna connector, USB-C charging, buzzer, rotary encoder and buttons\u003c\/li\u003e\n\u003cli\u003eApprox. 82 × 51 mm, durable enclosure\u003c\/li\u003e\n\u003cli\u003eWorks with the official Meshtastic app for Android and iOS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuits hiking groups, events and rural areas without coverage, or as the first node in a local mesh. Meshtastic is an open-source mesh protocol on the licence-free 868 MHz ISM band: no subscription, no internet required.\u003c\/p\u003e\n\u003cp\u003eContains a lithium-ion battery. EU importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54866654789959,"sku":"ELC-THINKNODE-M1-868","price":799.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/thinknode_m1_for_meshtastic_1.jpg?v=1788849501"},{"product_id":"elecrow-thinknode-m4-7000-mah-power-bank-with-meshtastic-node-gps-tracker-868-mhz","title":"Elecrow ThinkNode M4 — 7000 mAh Power Bank with Meshtastic Node \u0026 GPS Tracker (868 MHz)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Ships from Kalmar, Sweden. EU 868 MHz version. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA power bank that is also a Meshtastic node. Charge your phone from it while it runs as a mesh node and GPS tracker for your group, so there is one less device to keep charged on the trail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNordic nRF52840 MCU, Bluetooth 5.4 LE\u003c\/li\u003e\n\u003cli\u003eSemtech LR1110 LoRa transceiver, EU 868 MHz\u003c\/li\u003e\n\u003cli\u003eMulti-constellation GNSS (GPS, BeiDou, GLONASS, QZSS) with built-in ceramic antenna and track recording\u003c\/li\u003e\n\u003cli\u003e7000 mAh (25.2 Wh) 18650 Li-ion battery\u003c\/li\u003e\n\u003cli\u003eUSB-C power in and out with USB PD, plus Qi wireless charging output\u003c\/li\u003e\n\u003cli\u003eMeshtastic pre-installed; configure with the official Meshtastic app for Android and iOS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePairs well with a ThinkNode M1 handheld: keep the M4 in the backpack as the always-on node and use the M1 for reading and writing messages.\u003c\/p\u003e\n\u003cp\u003eContains a lithium-ion battery. EU importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54866657018183,"sku":"ELC-THINKNODE-M4-868","price":949.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/thinknode_m4_powerbank_for_meshtastic_1_1.jpg?v=1788849505"},{"product_id":"elecrow-thinknode-m7-meshtastic-gateway-with-ethernet-poe-868-mhz","title":"Elecrow ThinkNode M7 — Meshtastic Gateway with Ethernet \u0026 PoE (868 MHz)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Ships from Kalmar, Sweden. EU 868 MHz Meshtastic version (not the LoRaWAN variant). \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA fixed indoor Meshtastic node powered over Ethernet. Plug it into a PoE switch, stick the antenna to a window and you have a permanent node that can bridge your local mesh to the internet over MQTT. The natural next step once you have a couple of handhelds and want coverage that never runs out of battery.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-S3 dual-core @ 240 MHz, 2.4 GHz Wi-Fi, Bluetooth 5 LE\u003c\/li\u003e\n\u003cli\u003eSemtech LR1110 LoRa transceiver, EU 868 MHz\u003c\/li\u003e\n\u003cli\u003e100 Mbps Ethernet (RJ45) with PoE power; USB-C for power and data\u003c\/li\u003e\n\u003cli\u003eExternal adhesive antenna, mounting base\u003c\/li\u003e\n\u003cli\u003eMeshtastic pre-installed; configure with the official Meshtastic app or web client\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires a PoE-capable switch or injector, or a USB-C power supply.\u003c\/p\u003e\n\u003cp\u003eEU importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54866659443015,"sku":"ELC-THINKNODE-M7-868","price":799.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/thinknode_m7_for_meshtastic_1_1.jpg?v=1788849509"},{"product_id":"raspberry-pi-5-4-gb-8-gb","title":"Raspberry Pi 5 — 4 GB \/ 8 GB","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eThe current flagship Raspberry Pi: two to three times the CPU performance of the Pi 4, PCIe for NVMe SSDs, dual 4K60 HDMI output and a proper power button.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcom BCM2712, quad-core Arm Cortex-A76 @ 2.4 GHz, VideoCore VII GPU\u003c\/li\u003e\n\u003cli\u003eLPDDR4X-4267 RAM: choose 4 GB or 8 GB\u003c\/li\u003e\n\u003cli\u003e2× micro-HDMI (4Kp60 with HDR), 2× USB 3.0, 2× USB 2.0, Gigabit Ethernet (PoE+ via HAT)\u003c\/li\u003e\n\u003cli\u003ePCIe 2.0 x1 connector for NVMe via M.2 HAT+, 2× 4-lane MIPI camera\/display connectors\u003c\/li\u003e\n\u003cli\u003eDual-band 802.11ac Wi-Fi, Bluetooth 5.0 \/ BLE, microSD slot (SDR104)\u003c\/li\u003e\n\u003cli\u003e40-pin GPIO header, real-time clock with battery connector, power button, fan connector\u003c\/li\u003e\n\u003cli\u003ePower: 5 V \/ 5 A USB-C (USB PD); the official 27 W supply is recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoard only. You will also need a power supply, a microSD card or NVMe drive, and a cooler; the Active Cooler is recommended for sustained loads.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"4 GB","offer_id":54866664456519,"sku":"RPI-PI5-4GB-SC1431","price":1409.0,"currency_code":"SEK","in_stock":true},{"title":"8 GB","offer_id":54866664489287,"sku":"RPI-PI5-8GB-SC1432","price":2249.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/raspberry-pi-5.png?v=1788422248"},{"product_id":"raspberry-pi-pico-2-pico-2-w","title":"Raspberry Pi Pico 2 \/ Pico 2 W","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi's second-generation microcontroller board, built on the RP2350. Faster, more RAM and more flash than the original Pico, with the same footprint and the same drag-and-drop programming.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor speed 150 MHz: RP2350 with dual Arm Cortex-M33 or dual RISC-V Hazard3 cores (selectable)\u003c\/li\u003e\n\u003cli\u003eInstalled memory: 520 KB SRAM plus 4 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eNo video output – a microcontroller board, not a Linux computer\u003c\/li\u003e\n\u003cli\u003e26 multifunction GPIO, 3 analogue inputs, 2× UART, 2× SPI, 2× I2C, 24 PWM channels, 12 PIO state machines\u003c\/li\u003e\n\u003cli\u003eMicro USB (USB 1.1 host\/device), 1.8–5.5 V input, low-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003ePico 2 W adds 2.4 GHz Wi-Fi 4 and Bluetooth 5.2 via the Infineon CYW43439\u003c\/li\u003e\n\u003cli\u003eProgrammable in C\/C++ and MicroPython; flash by dragging a UF2 file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePico 2 H ships with the 40 header pins pre-soldered, ready for a breadboard. Pico 2 W ships without headers.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Pico 2 H (headers soldered)","offer_id":54866674843975,"sku":"RPI-PICO2H-SC1632","price":89.0,"currency_code":"SEK","in_stock":true},{"title":"Pico 2 W (Wi-Fi + Bluetooth, no headers)","offer_id":54866674876743,"sku":"RPI-PICO2W-SC1633","price":95.0,"currency_code":"SEK","in_stock":true},{"title":"Pico 2 WH (Wi-Fi + Bluetooth, headers soldered)","offer_id":54873727369543,"sku":"RPI-PICO2WH-SC1634","price":109.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/pico-2.webp?v=1791990551"},{"product_id":"raspberry-pi-27w-usb-c-power-supply-eu-plug","title":"Raspberry Pi 27W USB-C Power Supply (EU plug)","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eThe power supply Raspberry Pi 5 is designed for. It negotiates 5 V at 5 A over USB PD, which is what the Pi 5 needs to give full power to USB peripherals and to drive an NVMe drive without throttling. Works with earlier Raspberry Pi models too.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5.1 V \/ 5 A (25.5 W) over USB-C with USB PD\u003c\/li\u003e\n\u003cli\u003eAlso provides 9 V \/ 3 A, 12 V \/ 2.25 A and 15 V \/ 1.8 A profiles for other USB-C devices\u003c\/li\u003e\n\u003cli\u003e1.2 m captive 17 AWG USB-C cable, EU (Type C) plug\u003c\/li\u003e\n\u003cli\u003e100–240 V input, 89 % average efficiency, 0.1 W no-load consumption\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Black","offer_id":54866677989703,"sku":"RPI-PSU27W-EU-BLK-SC1157","price":179.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/b69995d1-cb01-40bd-a745-0bb9f0264828_PSU_BLACK.jpg?v=1788422272"},{"product_id":"raspberry-pi-active-cooler-for-raspberry-pi-5","title":"Raspberry Pi Active Cooler for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eAn aluminium heatsink with a temperature-controlled blower fan that clips straight onto the Raspberry Pi 5. It keeps the board below its throttling temperature under sustained load, so you get the full 2.4 GHz all the time instead of only in bursts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium heatsink with pre-applied thermal pads for the SoC, PMIC and RAM\u003c\/li\u003e\n\u003cli\u003eRadial blower fan controlled by the Pi's firmware; near-silent at idle\u003c\/li\u003e\n\u003cli\u003eConnects to the Pi 5 fan header, mounts with two push-pins; no screws\u003c\/li\u003e\n\u003cli\u003eCompatible with the official Raspberry Pi 5 Case (lid fan removed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended for any Pi 5 used as a desktop, server or with an NVMe drive.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54866680906055,"sku":"RPI-ACTIVE-COOLER-SC1148","price":89.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/af3923c1-f1b1-40fd-8866-1baaf64086f9_Active_Cooler.jpg?v=1788422277"},{"product_id":"raspberry-pi-5-case-official","title":"Raspberry Pi 5 Case (Official)","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eThe official case for Raspberry Pi 5, with a built-in fan and heatsink. The lid lifts off for access to the GPIO header, and the fan is controlled by the Pi so it stays quiet when the board is idle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated variable-speed fan with heatsink, connected to the Pi 5 fan header\u003c\/li\u003e\n\u003cli\u003eRemovable lid; cut-outs for all ports, microSD and camera\/display cables\u003c\/li\u003e\n\u003cli\u003eStackable with other Pi 5 cases\u003c\/li\u003e\n\u003cli\u003eAvailable in red\/white or black\/grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCase only, Raspberry Pi 5 not included.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Red \/ White","offer_id":54866684084551,"sku":"RPI-PI5-CASE-RED","price":149.0,"currency_code":"SEK","in_stock":true},{"title":"Black \/ Grey","offer_id":54866684117319,"sku":"RPI-PI5-CASE-BLK","price":149.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/488f4e12-de49-4297-bbc6-c3753c060d40_Case_White.jpg?v=1788422257"},{"product_id":"raspberry-pi-4-model-b-4-gb-8-gb","title":"Raspberry Pi 4 Model B — 4 GB \/ 8 GB","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eThe previous-generation full-size Raspberry Pi, still in production and still the right choice when a project, HAT or software stack was built around it. Cheaper than the Pi 5 at the same memory size and needs only a 5 V \/ 3 A supply.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor speed 1.5 GHz: Broadcom BCM2711, quad-core Arm Cortex-A72 (64-bit)\u003c\/li\u003e\n\u003cli\u003eInstalled memory: 4 GB or 8 GB LPDDR4-3200 RAM\u003c\/li\u003e\n\u003cli\u003eVideo output: 2× micro-HDMI ports (up to 4Kp60)\u003c\/li\u003e\n\u003cli\u003e2× USB 3.0, 2× USB 2.0, Gigabit Ethernet (PoE via HAT)\u003c\/li\u003e\n\u003cli\u003eDual-band 802.11ac Wi-Fi, Bluetooth 5.0 \/ BLE, microSD slot\u003c\/li\u003e\n\u003cli\u003e2-lane MIPI CSI camera and DSI display connectors, 40-pin GPIO header\u003c\/li\u003e\n\u003cli\u003ePower: 5 V \/ 3 A via USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoard only. Needs a power supply, a microSD card and, for sustained loads, a heatsink or fan.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"4 GB","offer_id":54867400524103,"sku":"RPI-PI4B-4GB","price":1269.0,"currency_code":"SEK","in_stock":true},{"title":"8 GB","offer_id":54867400556871,"sku":"RPI-PI4B-8GB","price":2049.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/3a15d4da-46e3-4940-8be6-9fc7d201affe_RPi_4B_FEATURED.jpg?v=1791990552"},{"product_id":"raspberry-pi-pico-pico-h-pico-w","title":"Raspberry Pi Pico \/ Pico H \/ Pico W","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eThe original Raspberry Pi Pico, built on the RP2040. Still the cheapest way into microcontroller programming with MicroPython or C, and the board most tutorials and kits are written for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor speed 133 MHz: RP2040 with dual Arm Cortex-M0+ cores\u003c\/li\u003e\n\u003cli\u003eInstalled memory: 264 KB SRAM plus 2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eNo video output – a microcontroller board, not a Linux computer\u003c\/li\u003e\n\u003cli\u003e26 multifunction GPIO, 3 analogue inputs, 2× UART, 2× SPI, 2× I2C, 16 PWM channels, 8 PIO state machines\u003c\/li\u003e\n\u003cli\u003eMicro USB (USB 1.1 host\/device), 1.8–5.5 V input, low-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003ePico W adds 2.4 GHz Wi-Fi 4 and Bluetooth 5.2 via the Infineon CYW43439\u003c\/li\u003e\n\u003cli\u003eProgrammable in C\/C++ and MicroPython; flash by dragging a UF2 file\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePico H ships with the 40 header pins pre-soldered and a 3-pin debug connector. Pico and Pico W ship without headers.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Pico (no headers)","offer_id":54867407470919,"sku":"RPI-PICO","price":59.0,"currency_code":"SEK","in_stock":true},{"title":"Pico H (headers soldered)","offer_id":54867407503687,"sku":"RPI-PICO-H","price":69.0,"currency_code":"SEK","in_stock":true},{"title":"Pico W (Wi-Fi + Bluetooth, no headers)","offer_id":54867407536455,"sku":"RPI-PICO-W","price":79.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/pico-rp2040.jpg?v=1788422310"},{"product_id":"raspberry-pi-m-2-hat-for-raspberry-pi-5","title":"Raspberry Pi M.2 HAT+ for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eAdds an M.2 slot to the Raspberry Pi 5 so you can boot from an NVMe SSD instead of a microSD card. Faster boot, much faster file access and far better reliability for anything that writes a lot: home servers, Home Assistant, databases, desktop use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnects to the Pi 5's PCIe FPC connector; supports PCIe Gen 2 x1 (Gen 3 can be enabled in software)\u003c\/li\u003e\n\u003cli\u003eFits M.2 M-key NVMe drives in 2230 and 2242 sizes\u003c\/li\u003e\n\u003cli\u003eHAT+ form factor, mounts on the standard 40-pin header with the included standoffs and 16-way FPC cable\u003c\/li\u003e\n\u003cli\u003ePowers the drive from the Pi 5, up to 3 A at 3.3 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits together with the Active Cooler. Does not fit inside the official Pi 5 Case with the lid on. SSD not included.\u003c\/p\u003e\n\u003cp\u003eAdd-on board only – no processor, memory or video output of its own; requires a Raspberry Pi 5.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54868073349447,"sku":"RPI-M2-HAT-PLUS-SC1166","price":169.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ZjT1rkMTzAJOChYu_M.2HATASSEMBLED.jpg?v=1788422318"},{"product_id":"raspberry-pi-5-camera-display-fpc-cables-22-pin-to-15-pin","title":"Raspberry Pi 5 Camera \u0026 Display FPC Cables (22-pin to 15-pin)","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship.\u003c\/strong\u003e Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi 5 uses a smaller 22-pin, 0.5 mm pitch connector for cameras and displays than earlier models. These are the official cables that convert to the 15-pin, 1 mm pitch connector on Raspberry Pi Camera Modules and the Touch Display.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCamera cable: 22-pin (Pi 5 end) to 15-pin (Camera Module 2, 3, HQ, AI Camera)\u003c\/li\u003e\n\u003cli\u003eDisplay cable: 22-pin (Pi 5 end) to 15-pin (Raspberry Pi Touch Display)\u003c\/li\u003e\n\u003cli\u003eAvailable in 200 mm, 300 mm and 500 mm lengths\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCamera Modules and the Touch Display are usually sold with a 15-to-15-pin cable that does not fit Pi 5, so plan on one of these for any Pi 5 camera or display build.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Camera cable 300 mm","offer_id":54868075151687,"sku":"RPI-FPC-CAM-300-SC1129","price":45.0,"currency_code":"SEK","in_stock":true},{"title":"Camera cable 500 mm","offer_id":54868075184455,"sku":"RPI-FPC-CAM-500-SC1130","price":55.0,"currency_code":"SEK","in_stock":true},{"title":"Display cable 200 mm","offer_id":54868075217223,"sku":"RPI-FPC-DISP-200-SC1131","price":35.0,"currency_code":"SEK","in_stock":true},{"title":"Display cable 300 mm","offer_id":54868075249991,"sku":"RPI-FPC-DISP-300-SC1132","price":45.0,"currency_code":"SEK","in_stock":true},{"title":"Display cable 500 mm","offer_id":54868075282759,"sku":"RPI-FPC-DISP-500-SC1133","price":55.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/762a3acf-49fb-4ea6-a00f-03493fcfb53c_Camera_cable.jpg?v=1788422326"},{"product_id":"raspberry-pi-camera-module-3","title":"Raspberry Pi Camera Module 3","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eThe current-generation Raspberry Pi camera, built around the 12-megapixel Sony IMX708 sensor with phase-detect autofocus and HDR. Available with a standard (75°) or wide (120°) field of view, each as a normal version and as a NoIR version without infrared filter for night-vision and IR-illuminated projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSensor: Sony IMX708, 11.9 MP, 1\/2.43\"\u003c\/li\u003e\n\u003cli\u003eVideo: 1080p50, 720p100, 480p120\u003c\/li\u003e\n\u003cli\u003eAutofocus with phase detection; HDR mode\u003c\/li\u003e\n\u003cli\u003eStandard: 75° field of view, 4.74 mm focal length\u003c\/li\u003e\n\u003cli\u003eWide: 120° field of view, 2.75 mm focal length\u003c\/li\u003e\n\u003cli\u003eNoIR: no infrared filter, for low-light and IR use\u003c\/li\u003e\n\u003cli\u003eSupplied with a 15-pin ribbon cable. Raspberry Pi 5 and Zero models use a 22-pin connector and need the 22-pin to 15-pin camera cable (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Standard","offer_id":54869806022983,"sku":"RPI-CAM3-STD-SC0872","price":349.0,"currency_code":"SEK","in_stock":true},{"title":"NoIR","offer_id":54869806055751,"sku":"RPI-CAM3-NOIR-SC0873","price":349.0,"currency_code":"SEK","in_stock":true},{"title":"Wide","offer_id":54869806088519,"sku":"RPI-CAM3-WIDE-SC0874","price":479.0,"currency_code":"SEK","in_stock":true},{"title":"Wide NoIR","offer_id":54869806121287,"sku":"RPI-CAM3-WIDENOIR-SC0875","price":479.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/b13db57d-59e5-48bb-a92f-7a2e7b023633_ALL_VARIANTS.jpg?v=1791990553"},{"product_id":"raspberry-pi-ai-hat-for-raspberry-pi-5","title":"Raspberry Pi AI HAT+ for Raspberry Pi 5","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eAdds a Hailo neural-network accelerator to Raspberry Pi 5 over the PCIe connector, so object detection, pose estimation, segmentation and similar computer-vision models run on the board in real time without sending video to the cloud. Choose 13 TOPS (Hailo-8L) or 26 TOPS (Hailo-8).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRequires Raspberry Pi 5; connects to the PCIe FPC connector\u003c\/li\u003e\n\u003cli\u003eSupported natively by Raspberry Pi OS and the rpicam apps; works with Camera Module 3 and the AI Camera\u003c\/li\u003e\n\u003cli\u003eIncludes 16 mm stacking GPIO header, PCIe cable and spacers\u003c\/li\u003e\n\u003cli\u003eFits under the official Raspberry Pi 5 Active Cooler\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd-on board only – no general-purpose processor, memory or video output of its own; requires a Raspberry Pi 5.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"13 TOPS (Hailo-8L)","offer_id":54869806219591,"sku":"RPI-AIHAT-13-SC1785","price":959.0,"currency_code":"SEK","in_stock":true},{"title":"26 TOPS (Hailo-8)","offer_id":54869806252359,"sku":"RPI-AIHAT-26-SC1791","price":1509.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ZxZWP4F3NbkBXxSl_AIHAT.jpg?v=1791990552"},{"product_id":"raspberry-pi-touch-display-2","title":"Raspberry Pi Touch Display 2","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eA capacitive touchscreen that connects straight to the Raspberry Pi display connector and is powered from the Pi's GPIO header, so no separate power supply or HDMI cable is needed. Five-point multi-touch, supported natively by Raspberry Pi OS. The 7-inch model is the full-size version; the 5-inch model is the compact version for smaller enclosures and panels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7\": 720 × 1280 IPS panel, 24-bit colour\u003c\/li\u003e\n\u003cli\u003e5\": compact version of the same display family\u003c\/li\u003e\n\u003cli\u003eInterface: DSI (display connector); power from the 40-pin header\u003c\/li\u003e\n\u003cli\u003eCables and mounting hardware included; the Raspberry Pi is mounted on the back of the display\u003c\/li\u003e\n\u003cli\u003eCompatible with all Raspberry Pi models with a display connector, including Raspberry Pi 5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"7 inch","offer_id":54869806317895,"sku":"RPI-DISP2-7-SC1635","price":819.0,"currency_code":"SEK","in_stock":true},{"title":"5 inch","offer_id":54869806350663,"sku":"RPI-DISP2-5-SC1975","price":549.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/aJ3AGaTt2nPbaURO_7inchdisplayfront.jpg?v=1791990553"},{"product_id":"raspberry-pi-nvme-ssd-m-2-2230-for-raspberry-pi-5","title":"Raspberry Pi NVMe SSD (M.2 2230) for Raspberry Pi 5","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eRaspberry Pi's own M.2 2230 NVMe SSD, tested and qualified for Raspberry Pi 5 together with the M.2 HAT+. Booting from NVMe gives noticeably faster boot times, application launches and file access than a microSD card, which makes it the sensible upgrade for a Pi used as a desktop, development machine or small server.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForm factor: M.2 2230, PCIe NVMe\u003c\/li\u003e\n\u003cli\u003eCapacities: 256 GB or 512 GB\u003c\/li\u003e\n\u003cli\u003eRequires Raspberry Pi 5 and the Raspberry Pi M.2 HAT+ (sold separately)\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi OS supports booting directly from NVMe\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"256 GB","offer_id":54869806776647,"sku":"RPI-SSD-256-SC1439","price":409.0,"currency_code":"SEK","in_stock":true},{"title":"512 GB","offer_id":54869806809415,"sku":"RPI-SSD-512-SC1440","price":619.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ZxI9dYF3NbkBXtSA_SSD256GB.jpg?v=1791990553"},{"product_id":"raspberry-pi-official-mouse","title":"Raspberry Pi Official Mouse","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eThe official Raspberry Pi mouse: a three-button optical mouse with scroll wheel and a 1.5 m USB-A cable, in the same red and white as the official keyboard and cases. Plug-and-play on any Raspberry Pi or PC.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree buttons plus scroll wheel\u003c\/li\u003e\n\u003cli\u003eOptical sensor\u003c\/li\u003e\n\u003cli\u003eUSB-A, 1.5 m cable\u003c\/li\u003e\n\u003cli\u003eColour: red \/ white\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54869807006023,"sku":"RPI-MOUSE-RED-SC0165","price":119.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1b7d602e46d47ed9f540f364bb3fbf1985b10164_red_white-mouse_8cbf11cd-ec66-4933-b973-6c6a9e573902.jpg?v=1791990552"},{"product_id":"raspberry-pi-4-case-official","title":"Raspberry Pi 4 Case (Official)","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eThe official two-part snap-fit case for Raspberry Pi 4 Model B, with cut-outs for all ports, the microSD slot and the camera and display connectors. Passive design with no fan; the lid lifts off for access to the GPIO header.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits Raspberry Pi 4 Model B (all memory sizes)\u003c\/li\u003e\n\u003cli\u003eTwo-part ABS case, tool-free assembly\u003c\/li\u003e\n\u003cli\u003eOpenings for USB, Ethernet, micro HDMI, USB-C power, audio, microSD, camera and display connectors\u003c\/li\u003e\n\u003cli\u003eColours: red \/ white or black \/ grey\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Red \/ White","offer_id":54869807366471,"sku":"RPI-PI4-CASE-RED","price":79.0,"currency_code":"SEK","in_stock":true},{"title":"Black \/ Grey","offer_id":54869807399239,"sku":"RPI-PI4-CASE-BLK","price":79.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/6526e7f1-84ba-4f2c-905b-17d3fb6e01df_copy_of_pi4_case_angle2.jpg?v=1791990554"},{"product_id":"raspberry-pi-ai-camera-sony-imx500","title":"Raspberry Pi AI Camera (Sony IMX500)","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eA camera module built around Sony's IMX500 intelligent vision sensor: a 12-megapixel image sensor with a neural-network accelerator on the same chip. Object detection, classification and pose estimation run on the camera itself, and the Raspberry Pi receives the results alongside the image. Because the inference happens in the sensor, it works on every Raspberry Pi with a camera connector, including Zero 2 W and Pi 4, not only Pi 5.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSensor: Sony IMX500, 12.3 MP, 1\/2.3\", with on-sensor AI accelerator\u003c\/li\u003e\n\u003cli\u003eField of view: 78°; manual adjustable focus\u003c\/li\u003e\n\u003cli\u003eShips with pre-trained MobileNet-SSD models; supports custom models via Sony's conversion tools\u003c\/li\u003e\n\u003cli\u003eSupported by Raspberry Pi OS and the rpicam apps \/ Picamera2\u003c\/li\u003e\n\u003cli\u003eIncludes both 15-pin and 22-pin ribbon cables\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCamera module only – no processor, memory or video output of its own; connects to the Raspberry Pi camera connector.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54869807825223,"sku":"RPI-AICAM-SC1174","price":959.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ZuG-thoQrfVKl-2R_AICameramain.jpg?v=1791990554"},{"product_id":"raspberry-pi-monitor-15-6-full-hd","title":"Raspberry Pi Monitor 15.6\" Full HD","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eRaspberry Pi's own 15.6-inch Full HD IPS monitor with HDMI input, built-in stereo speakers and an integrated fold-out stand. Designed to be powered from the Raspberry Pi's own USB port (at reduced brightness) or from any USB-C supply for full brightness, so a Pi plus this monitor is a complete desktop with one power supply. Works as a standard HDMI display for any computer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15.6\" IPS panel, 1920 × 1080\u003c\/li\u003e\n\u003cli\u003eHDMI input; power via USB-C (from the Pi's USB-A port or a separate supply)\u003c\/li\u003e\n\u003cli\u003eBuilt-in speakers, 3.5 mm headphone output\u003c\/li\u003e\n\u003cli\u003eIntegrated adjustable stand, VESA 75 mounting holes\u003c\/li\u003e\n\u003cli\u003eHDMI and USB cables included\u003c\/li\u003e\n\u003cli\u003eColours: black or red \/ white\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Black","offer_id":54869807857991,"sku":"RPI-MONITOR-BLK-SC1228","price":1369.0,"currency_code":"SEK","in_stock":true},{"title":"Red \/ White","offer_id":54869807890759,"sku":"RPI-MONITOR-RED-SC0940","price":1369.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/Z1ArR5bqstJ98BLx_Monitorproductpage.jpg?v=1791990553"},{"product_id":"raspberry-pi-usb-3-0-flash-drive","title":"Raspberry Pi USB 3.0 Flash Drive","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eRaspberry Pi's own USB 3.0 flash drive, sized for use as a boot drive, backup target or for moving files between a Raspberry Pi and a PC. Raspberry Pi 4, 400, 5 and 500 can boot directly from USB, so this is a simple alternative to microSD where NVMe is not an option.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUSB 3.0 (USB-A), backwards compatible with USB 2.0\u003c\/li\u003e\n\u003cli\u003eCapacities: 128 GB or 256 GB\u003c\/li\u003e\n\u003cli\u003eCompatible with all Raspberry Pi models and any PC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"128 GB","offer_id":54869808185671,"sku":"RPI-USB-128-SC2140","price":419.0,"currency_code":"SEK","in_stock":true},{"title":"256 GB","offer_id":54869808218439,"sku":"RPI-USB-256-SC2141","price":739.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/aXC6zAIvOtkhBxTI_Flashdrivehero.jpg?v=1791990554"},{"product_id":"raspberry-pi-sense-hat","title":"Raspberry Pi Sense HAT","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eThe add-on board used aboard the International Space Station in the Astro Pi programme. It combines an 8 × 8 RGB LED matrix and a five-way joystick with a set of environmental and motion sensors, all readable from a few lines of Python with the sense-hat library included in Raspberry Pi OS. A staple for classrooms, weather stations and first physical-computing projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8 × 8 RGB LED matrix\u003c\/li\u003e\n\u003cli\u003eFive-button joystick\u003c\/li\u003e\n\u003cli\u003eSensors: temperature, humidity, barometric pressure, gyroscope, accelerometer, magnetometer, colour and brightness\u003c\/li\u003e\n\u003cli\u003eFits any Raspberry Pi with a 40-pin GPIO header (mounting hardware included)\u003c\/li\u003e\n\u003cli\u003ePython library pre-installed in Raspberry Pi OS; emulator available for use without hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd-on board only – no processor, memory or video output of its own; requires a Raspberry Pi.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54869808611655,"sku":"RPI-SENSEHAT","price":409.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/Sense-HAT.jpg?v=1788431592"},{"product_id":"raspberry-pi-build-hat-lego-technic","title":"Raspberry Pi Build HAT (LEGO Technic)","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eLets a Raspberry Pi drive up to four LEGO Technic motors and sensors from the LEGO Education SPIKE portfolio through their standard LPF2 connectors, using a simple Python library. Developed with LEGO Education for robotics builds that combine LEGO mechanics with Raspberry Pi programming, cameras and connectivity.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour LPF2 ports for LEGO Technic motors and sensors (SPIKE Prime, SPIKE Essential, Mindstorms Robot Inventor)\u003c\/li\u003e\n\u003cli\u003ePython library: buildhat\u003c\/li\u003e\n\u003cli\u003eFits Raspberry Pi 4, Raspberry Pi 5 and Zero 2 W (40-pin header)\u003c\/li\u003e\n\u003cli\u003eRequires an external 8 V power supply to drive motors, such as the Raspberry Pi Build HAT Power Supply (sold separately); the HAT can also power the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eLEGO elements not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd-on board only – no processor, memory or video output of its own; requires a Raspberry Pi.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54869808906567,"sku":"RPI-BUILDHAT-SC0622","price":349.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/build-hat.jpg?v=1788431596"},{"product_id":"raspberry-pi-official-keyboard","title":"Raspberry Pi Official Keyboard","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden. Official Raspberry Pi product.\u003c\/p\u003e\u003cp\u003eThe official Raspberry Pi keyboard: a compact 79-key layout with an integrated three-port USB hub, so a mouse and a USB drive can plug into the keyboard instead of the Pi. Supplied with a detachable USB-A to micro-USB cable. Available in German (QWERTZ) and UK layouts, in red \/ white or black \/ grey to match the official mouse and cases.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e79-key compact layout with three USB 2.0 type A host ports\u003c\/li\u003e\n\u003cli\u003eDetachable USB-A to micro-USB type B cable included\u003c\/li\u003e\n\u003cli\u003eNum Lock, Caps Lock and Scroll Lock indicator LEDs\u003c\/li\u003e\n\u003cli\u003eLayouts: German (DE) or UK\u003c\/li\u003e\n\u003cli\u003eColours: red \/ white or black \/ grey\u003c\/li\u003e\n\u003cli\u003eWorks with any Raspberry Pi or PC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"German (DE) \/ Red \/ White","offer_id":54869808972103,"sku":"RPI-KEYB-DE-RED","price":229.0,"currency_code":"SEK","in_stock":true},{"title":"German (DE) \/ Black \/ Grey","offer_id":54869809004871,"sku":"RPI-KEYB-DE-BLK","price":249.0,"currency_code":"SEK","in_stock":true},{"title":"UK \/ Red \/ White","offer_id":54869809037639,"sku":"RPI-KEYB-UK-RED","price":249.0,"currency_code":"SEK","in_stock":true},{"title":"UK \/ Black \/ Grey","offer_id":54869809070407,"sku":"RPI-KEYB-UK-BLK","price":249.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/76d43bab-d6e5-479f-a31e-bea771589ed1_uk_white.jpg?v=1791990555"},{"product_id":"seeed-studio-xiao-esp32-c3-s3-s3-sense","title":"Seeed Studio XIAO ESP32 (C3 \/ S3 \/ S3 Sense)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eSeeed Studio's thumb-sized XIAO boards pack an ESP32 with Wi-Fi and Bluetooth into a 21 × 17.8 mm module with USB-C, a built-in Li-ion charging circuit and castellated pads for surface mounting. Choose the ESP32-C3 (RISC-V, the budget all-rounder), the ESP32-S3 (dual-core with 8 MB PSRAM for demanding projects) or the ESP32-S3 Sense, which adds a plug-in camera, a digital microphone and a microSD slot for vision and audio projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eXIAO ESP32C3:\u003c\/strong\u003e ESP32-C3 RISC-V single-core 160 MHz, 400 KB SRAM, 4 MB flash, Wi-Fi 4 and Bluetooth 5 LE, external antenna included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXIAO ESP32S3:\u003c\/strong\u003e ESP32-S3 dual-core 240 MHz, 8 MB PSRAM, 8 MB flash, Wi-Fi 4 and Bluetooth 5 LE, external antenna included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXIAO ESP32S3 Sense:\u003c\/strong\u003e as ESP32S3, plus detachable camera module (OV3660 in current production), digital microphone and microSD slot\u003c\/li\u003e\n\u003cli\u003eAll models: USB-C, Li-ion battery charging, 11 GPIO, 21 × 17.8 mm; programmable with Arduino IDE, ESP-IDF, MicroPython and CircuitPython\u003c\/li\u003e\n\u003cli\u003ePin headers pre-soldered\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"XIAO ESP32C3","offer_id":54873709216071,"sku":"SEEED-102010633","price":99.0,"currency_code":"SEK","in_stock":false},{"title":"XIAO ESP32S3","offer_id":54873709248839,"sku":"SEEED-102010634","price":149.0,"currency_code":"SEK","in_stock":false},{"title":"XIAO ESP32S3 Sense (camera + mic)","offer_id":54873709281607,"sku":"SEEED-102010635","price":339.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2-102010633-seeed-studio-xiao-esp32c3-_pre-soldered_-45font.jpg?v=1791991283"},{"product_id":"seeed-studio-xiao-expansion-base-oled-rtc-microsd-grove","title":"Seeed Studio XIAO Expansion Base (OLED, RTC, microSD, Grove)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe official carrier board for the Seeed Studio XIAO family. Plug any XIAO (ESP32C3, ESP32S3, RP2040, SAMD21, nRF52840) into the socket and you get a 0.96\" OLED display, a real-time clock with battery holder, a microSD slot, a buzzer, user and reset buttons and a set of Grove connectors, so sensors and actuators connect without soldering. Ideal for prototyping and classroom use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0.96\" OLED display (SSD1306, I2C)\u003c\/li\u003e\n\u003cli\u003eReal-time clock (PCF8563) with coin-cell holder\u003c\/li\u003e\n\u003cli\u003emicroSD card slot, passive buzzer, user button, reset button\u003c\/li\u003e\n\u003cli\u003eGrove connectors for I2C, UART and analog\/digital I\/O\u003c\/li\u003e\n\u003cli\u003eLi-ion battery connector with charging via the XIAO; USB-C and 5 V servo header\u003c\/li\u003e\n\u003cli\u003eCompatible with all XIAO boards (XIAO not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":54873709805895,"sku":"SEEED-103030356","price":299.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/zheng1.jpg?v=1788454371"},{"product_id":"espressif-esp32-devkitc-official-development-board","title":"Espressif ESP32-S3 \/ ESP32-C6 DevKitC-1 (official development board)","description":"\u003cp\u003eOrder-to-ship. Ordered in when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eEspressif's own reference development boards: breadboard-friendly, every pin broken out, and the exact boards that Espressif's documentation and examples are written for. Choose the ESP32-S3 for maximum performance and memory, or the ESP32-C6 for Wi-Fi 6 and Zigbee\/Thread in Matter-ready smart-home projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3-DevKitC-1-N8R8:\u003c\/strong\u003e ESP32-S3-WROOM-1 module, dual-core 240 MHz, 8 MB flash, 8 MB octal PSRAM, Wi-Fi 4 and Bluetooth 5 LE; two USB-C ports (UART bridge and native USB-OTG)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-C6-DevKitC-1-N8:\u003c\/strong\u003e ESP32-C6-WROOM-1 module, RISC-V 160 MHz, 8 MB flash, Wi-Fi 6, Bluetooth 5.3 LE, Zigbee and Thread (IEEE 802.15.4); two USB-C ports\u003c\/li\u003e\n\u003cli\u003eBoth: 5 V via USB-C, 3.3 V regulator, boot and reset buttons, RGB LED, pin headers pre-soldered\u003c\/li\u003e\n\u003cli\u003eProgrammable with ESP-IDF, Arduino IDE, PlatformIO and MicroPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Espressif","offers":[{"title":"ESP32-S3-DevKitC-1-N8R8 (8 MB flash + 8 MB PSRAM)","offer_id":54873710854471,"sku":"ESP32S3DEVKC-8R8","price":239.0,"currency_code":"SEK","in_stock":false},{"title":"ESP32-C6-DevKitC-1-N8 (Wi-Fi 6, Zigbee\/Thread)","offer_id":54873710887239,"sku":"ESP32C6-DEVKITC1N8","price":229.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32-s3-devkitc-1-v1.1-isometric.png?v=1788454372"},{"product_id":"elecrow-crowpanel-advance-2-8-esp32-s3-hmi-touch-display-320-240","title":"Elecrow CrowPanel Advance 2.8\" — ESP32-S3 HMI Touch Display (320×240)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 2.8\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 320×240, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.8\" IPS panel, 320×240, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eSPI display, compact size – ideal for a small status panel or Meshtastic display\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 2.8\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919438958919,"sku":"ELC-CROWPANEL-ADV-2.8","price":439.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_2.8inch_display.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-3-5-esp32-s3-hmi-touch-display-480-320","title":"Elecrow CrowPanel Advance 3.5\" — ESP32-S3 HMI Touch Display (480×320)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 3.5\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 480×320, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.5\" IPS panel, 480×320, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eSPI display with ILI9488 driver\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 3.5\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439221063,"sku":"ELC-CROWPANEL-ADV-3.5","price":539.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_3.5inch_display.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-4-3-esp32-s3-hmi-touch-display-800-480","title":"Elecrow CrowPanel Advance 4.3\" — ESP32-S3 HMI Touch Display (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 4.3\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 800×480, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4.3\" IPS panel, 800×480, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eRGB display, driver ST7262\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 4.3\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439384903,"sku":"ELC-CROWPANEL-ADV-4.3","price":589.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_4.3inch_display1_1.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-5-esp32-s3-hmi-touch-display-800-480","title":"Elecrow CrowPanel Advance 5\" — ESP32-S3 HMI Touch Display (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 5\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 800×480, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5\" IPS panel, 800×480, capacitive touch, 178° viewing angle, 400 cd\/m²\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eRGB display, driver ST7262\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 5\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/pub\/wiki\/CrowPanel_Advance_5.0-HMI_ESP32_AI_Display.html\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439515975,"sku":"ELC-CROWPANEL-ADV-5","price":599.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_5inch_display_1.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-7-esp32-s3-hmi-touch-display-800-480","title":"Elecrow CrowPanel Advance 7\" — ESP32-S3 HMI Touch Display (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 7\" is a ready-to-use HMI touch display with the ESP32-S3-WROOM-1 built in: an IPS capacitive touchscreen at 800×480, 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash, Wi-Fi and Bluetooth, and a row of Crowtail\/Grove connectors on the back. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7\" IPS panel, 800×480, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-S3-WROOM-1 — 240 MHz dual-core, 8 MB PSRAM, 16 MB Flash\u003c\/li\u003e\n\u003cli\u003eRGB display – the most popular size for Home Assistant wall panels\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReplaceable wireless module slot (Zigbee\/Thread\/Matter, LoRa, Wi-Fi 6, nRF2401 – modules sold separately)\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 7\" display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439679815,"sku":"ELC-CROWPANEL-ADV-7","price":649.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32_advance_hmi_7inch_display.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-5-esp32-p4-hmi-ai-touch-display-with-wi-fi-6-800-480","title":"Elecrow CrowPanel Advance 5\" ESP32-P4 — HMI AI Touch Display with Wi-Fi 6 (800×480)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 5\" ESP32-P4 is a ready-to-use HMI touch display built around Espressif's ESP32-P4: a 400 MHz dual-core RISC-V processor with 32 MB PSRAM and 16 MB Flash, paired with an ESP32-C6 module for Wi-Fi 6 and Bluetooth 5.3. The IPS capacitive touchscreen runs at 800×480 over MIPI-DSI, so animations and video decode are smooth. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5\" IPS panel, 800×480, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-P4 — 400 MHz dual-core RISC-V, 32 MB PSRAM, 16 MB Flash, hardware graphics and video acceleration\u003c\/li\u003e\n\u003cli\u003eESP32-C6 wireless module — Wi-Fi 6 and Bluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 5\" ESP32-P4 display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamera not included.\u003c\/strong\u003e The camera shown in some of the pictures is an optional 2 MP add-on; this listing is the version without camera.\u003c\/p\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919439909191,"sku":"ELC-CROWPANEL-ADV-P4-5","price":649.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/crowpanel_esp32-p4_5inch_hmi_display_1.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-7-esp32-p4-hmi-ai-touch-display-with-wi-fi-6-1024-600","title":"Elecrow CrowPanel Advance 7\" ESP32-P4 — HMI AI Touch Display with Wi-Fi 6 (1024×600)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 7\" ESP32-P4 is a ready-to-use HMI touch display built around Espressif's ESP32-P4: a 400 MHz dual-core RISC-V processor with 32 MB PSRAM and 16 MB Flash, paired with an ESP32-C6 module for Wi-Fi 6 and Bluetooth 5.3. The IPS capacitive touchscreen runs at 1024×600 over MIPI-DSI, so animations and video decode are smooth. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7\" IPS panel, 1024×600, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-P4 — 400 MHz dual-core RISC-V, 32 MB PSRAM, 16 MB Flash, hardware graphics and video acceleration\u003c\/li\u003e\n\u003cli\u003eESP32-C6 wireless module — Wi-Fi 6 and Bluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 7\" ESP32-P4 display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamera not included.\u003c\/strong\u003e The camera shown in some of the pictures is an optional 2 MP add-on; this listing is the version without camera.\u003c\/p\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919440433479,"sku":"ELC-CROWPANEL-ADV-P4-7","price":829.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32-p4_7inch_display_1_2.jpg?v=1791913800"},{"product_id":"elecrow-crowpanel-advance-10-1-esp32-p4-hmi-ai-touch-display-with-wi-fi-6-1024-600","title":"Elecrow CrowPanel Advance 10.1\" ESP32-P4 — HMI AI Touch Display with Wi-Fi 6 (1024×600)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CrowPanel Advance 10.1\" ESP32-P4 is the full-size wall panel in the series, built around Espressif's ESP32-P4: a 400 MHz dual-core RISC-V processor with 32 MB PSRAM and 16 MB Flash, paired with an ESP32-C6 module for Wi-Fi 6 and Bluetooth 5.3. The IPS capacitive touchscreen runs at 1024×600 over MIPI-DSI, so animations and video decode are smooth. Flash your own firmware and use it as a wall panel for Home Assistant, a screen for Klipper, a weather or air-quality station, or a control panel for any ESP32 project.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10.1\" IPS panel, 1024×600, capacitive touch, 178° viewing angle\u003c\/li\u003e\n\u003cli\u003eESP32-P4 — 400 MHz dual-core RISC-V, 32 MB PSRAM, 16 MB Flash, hardware graphics and video acceleration\u003c\/li\u003e\n\u003cli\u003eESP32-C6 wireless module — Wi-Fi 6 and Bluetooth 5.3\u003c\/li\u003e\n\u003cli\u003eSpeaker port and microphone for voice interaction\u003c\/li\u003e\n\u003cli\u003eReal-time clock, battery connector with charging, microSD slot, UART and I²C ports\u003c\/li\u003e\n\u003cli\u003eArduino IDE, ESP-IDF, PlatformIO, MicroPython; LVGL and SquareLine Studio supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × CrowPanel Advance 10.1\" ESP32-P4 display\u003c\/li\u003e\n\u003cli\u003e1 × USB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 × Crowtail\/Grove 4-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamera not included.\u003c\/strong\u003e The camera shown in some of the pictures is an optional 2 MP add-on; this listing is the version without camera.\u003c\/p\u003e\u003cp\u003eDocumentation, examples and firmware: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e. CE, FCC and RoHS reports available on request.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919440630087,"sku":"ELC-CROWPANEL-ADV-P4-10.1","price":849.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/esp32-p4_10.1inch_hmi_display_1.jpg?v=1791913800"},{"product_id":"elecrow-thinknode-m5-meshtastic-handheld-with-1-54-screen-gps-868-mhz","title":"Elecrow ThinkNode M5 — Meshtastic Handheld with 1.54\" Screen \u0026 GPS (868 MHz)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ThinkNode M5 is a ready-made Meshtastic node from Elecrow: encrypted text messages and position sharing over LoRa, no mobile network or Wi-Fi needed. Nodes relay for each other, so a few of them cover a valley, a festival site or a whole town. 868 MHz version for Europe. Meshtastic firmware pre-installed – pair it with the Meshtastic app and go.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESP32-S3 with SX1262 LoRa – Meshtastic and MeshCore capable\u003c\/li\u003e\n\u003cli\u003e1.54\" screen, GPS, built-in battery, USB-C charging\u003c\/li\u003e\n\u003cli\u003eCompact enclosure with buttons – works standalone or paired with your phone over Bluetooth\u003c\/li\u003e\n\u003cli\u003eYou need at least two nodes to build a mesh – combine with a ThinkNode M1, M6 or M9\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFirmware, manuals and CE documentation: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e and \u003ca href=\"https:\/\/meshtastic.org\" target=\"_blank\" rel=\"noopener\"\u003emeshtastic.org\u003c\/a\u003e. Contains a lithium battery.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919449280839,"sku":"ELC-THINKNODE-M5-868","price":799.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/thinknode_m5_for_meshtastic_1.jpg?v=1788849512"},{"product_id":"elecrow-thinknode-m6-outdoor-solar-meshtastic-node-with-gps-ip65-868-mhz","title":"Elecrow ThinkNode M6 — Outdoor Solar Meshtastic Node with GPS, IP65 (868 MHz)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ThinkNode M6 is the relay node that keeps a Meshtastic mesh alive: a weatherproof, solar-powered LoRa node you mount on a roof, a mast or a tree, and then forget about. It forwards messages for every other node in range – encrypted, no mobile network or Wi-Fi needed. 868 MHz version for Europe. Meshtastic firmware pre-installed.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003enRF52840 with LoRa – very low power, runs on the built-in solar panel and battery\u003c\/li\u003e\n\u003cli\u003eIP65 enclosure for outdoor use, external antenna, pole\/wall mounting\u003c\/li\u003e\n\u003cli\u003eGPS for position reporting\u003c\/li\u003e\n\u003cli\u003eMeshtastic and MeshCore capable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFirmware, manuals and CE documentation: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e and \u003ca href=\"https:\/\/meshtastic.org\" target=\"_blank\" rel=\"noopener\"\u003emeshtastic.org\u003c\/a\u003e. Contains a lithium battery.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919449477447,"sku":"ELC-THINKNODE-M6-868","price":1149.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/thinknode_m6_1_1.jpg?v=1791989872"},{"product_id":"elecrow-thinknode-m9-meshtastic-terminal-with-full-keyboard-2-4-lcd-gps-868-mhz","title":"Elecrow ThinkNode M9 — Meshtastic Terminal with Full Keyboard, 2.4\" LCD \u0026 GPS (868 MHz)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e We order in batches from Elecrow and ship to you from Kalmar as soon as the batch arrives. \u003cstrong\u003eAvailable for delivery within Sweden only.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ThinkNode M9 is a Meshtastic communicator you can use without a phone: a full QWERTY keyboard and a 2.4\" colour display let you read and type encrypted messages directly on the device. LoRa mesh, no mobile network or Wi-Fi needed. 868 MHz version for Europe. Meshtastic firmware pre-installed.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESP32-S3 + Semtech LR1110 LoRa\u003c\/li\u003e\n\u003cli\u003eFull QWERTY keyboard, 2.4\" colour LCD, GPS\u003c\/li\u003e\n\u003cli\u003e2300 mAh battery, USB-C charging\u003c\/li\u003e\n\u003cli\u003eWorks standalone or paired with the Meshtastic app over Bluetooth\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFirmware, manuals and CE documentation: \u003ca href=\"https:\/\/www.elecrow.com\/wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eElecrow wiki\u003c\/a\u003e and \u003ca href=\"https:\/\/meshtastic.org\" target=\"_blank\" rel=\"noopener\"\u003emeshtastic.org\u003c\/a\u003e. Contains a lithium battery.\u003c\/p\u003e\u003cp\u003eManufacturer: Elecrow, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Elecrow","offers":[{"title":"Default Title","offer_id":54919449575751,"sku":"ELC-THINKNODE-M9-868","price":1099.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/thinknode_m9_for_meshtastic_with_full_keyboard.jpg?v=1788849518"},{"product_id":"waveshare-7-hdmi-lcd-h-1024-600-ips-touchscreen-for-raspberry-pi","title":"Waveshare 7\" HDMI LCD (H) — 1024×600 IPS Touchscreen for Raspberry Pi","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Waveshare 7\" HDMI LCD (H) is a 1024×600 IPS touchscreen for Raspberry Pi, Jetson Nano and PC. It connects over HDMI for video and USB for 5-point capacitive touch, needs no drivers on Raspberry Pi OS, and has mounting holes for a Pi on the back – the easy route to a compact desktop or wall-mounted Pi 5 setup.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7\" IPS panel, 1024×600, 170° viewing angle, toughened glass front\u003c\/li\u003e\n\u003cli\u003eHDMI video, USB capacitive touch (5 points), no driver needed on Raspberry Pi OS, Ubuntu, Windows\u003c\/li\u003e\n\u003cli\u003eAlso works with Jetson Nano, PC, and as a touch monitor for Klipper\/Home Assistant boxes\u003c\/li\u003e\n\u003cli\u003eBacklight control, 3.5 mm audio out, speaker header\u003c\/li\u003e\n\u003cli\u003eMounting holes for Raspberry Pi 3\/4\/5 on the back; matching cases available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × 7\" HDMI LCD (H)\u003c\/li\u003e\n\u003cli\u003eHDMI and USB cables\u003c\/li\u003e\n\u003cli\u003eStand-offs and screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.waveshare.com\/wiki\/7inch_HDMI_LCD_(H)\" target=\"_blank\" rel=\"noopener\"\u003eWaveshare wiki\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Waveshare, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54919873036615,"sku":"WSH-14628","price":929.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/7hp-fs.jpg?v=1791991664"},{"product_id":"waveshare-10-1-hdmi-lcd-e-1024-600-ips-touchscreen-optical-bonding-for-raspberry-pi","title":"Waveshare 10.1\" HDMI LCD (E) — 1024×600 IPS Touchscreen, Optical Bonding, for Raspberry Pi","description":"\u003cp\u003e\u003cstrong\u003eOrder-to-ship:\u003c\/strong\u003e ordered from our distributor when you place your order and shipped to you from Kalmar, Sweden.\u003c\/p\u003e\u003cp\u003eThe Waveshare 10.1\" HDMI LCD (E) is a 1024×600 IPS touchscreen with an optically bonded, toughened-glass front – the full-size display for a Raspberry Pi 5 desktop, a Klipper printer or a Home Assistant wall panel. HDMI for video, USB for 10-point capacitive touch, no drivers needed on Raspberry Pi OS.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10.1\" IPS panel, 1024×600, optical bonding for a clear, glare-free image\u003c\/li\u003e\n\u003cli\u003eHDMI video, USB capacitive touch (10 points), driver-free on Raspberry Pi OS, Ubuntu, Windows\u003c\/li\u003e\n\u003cli\u003eWorks with Raspberry Pi, Jetson Nano and PC\u003c\/li\u003e\n\u003cli\u003eBacklight control, 3.5 mm audio out\u003c\/li\u003e\n\u003cli\u003eMounting holes for Raspberry Pi on the back; VESA-compatible cases available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × 10.1\" HDMI LCD (E)\u003c\/li\u003e\n\u003cli\u003eHDMI and USB cables\u003c\/li\u003e\n\u003cli\u003eStand-offs and screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.waveshare.com\/wiki\/10.1inch_HDMI_LCD_(E)\" target=\"_blank\" rel=\"noopener\"\u003eWaveshare wiki\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eManufacturer: Waveshare, Shenzhen. Importer: Gadwave, Kalmar, Sweden.\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54919873069383,"sku":"WSH-18096","price":1679.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/10.1ep-1.jpg?v=1788811151"},{"product_id":"arduino-giga-r1-wifi","title":"Arduino GIGA R1 WiFi","description":"\u003cp\u003eThe Arduino GIGA R1 WiFi is Arduino's most capable maker board: a dual-core STM32H747XI (Cortex-M7 at 480 MHz and Cortex-M4 at 240 MHz) in the familiar Mega\/Due form factor, with Wi-Fi and Bluetooth Low Energy on board. It is built for projects that outgrow a classic Uno: audio synthesis, graphics, robotics, home automation and anything that needs many I\/O pins and real processing headroom. The two cores can be programmed separately, so you can run MicroPython on one and Arduino code on the other.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontroller: STM32H747XI, dual core (Cortex-M7 480 MHz + Cortex-M4 240 MHz)\u003c\/li\u003e\n\u003cli\u003eMemory: 2 MB flash, 1 MB RAM, plus 16 MB external flash and 8 MB SDRAM\u003c\/li\u003e\n\u003cli\u003eWireless: Wi-Fi 802.11 b\/g\/n and Bluetooth Low Energy (Murata 1DX), onboard antenna\u003c\/li\u003e\n\u003cli\u003eSecurity: ATECC608A crypto chip\u003c\/li\u003e\n\u003cli\u003eI\/O: 76 GPIO, 12 analog inputs, 2 DAC, 4 UART, 3 I2C, 2 SPI, CAN FD\u003c\/li\u003e\n\u003cli\u003eConnectors: USB-C (programming, HID), USB-A host, 3.5 mm audio jack, camera and display connectors\u003c\/li\u003e\n\u003cli\u003eOperating voltage 3.3 V, input 6–24 V via VIN\u003c\/li\u003e\n\u003cli\u003eDimensions: 101.6 x 53.3 mm (same as Mega\/Due)\u003c\/li\u003e\n\u003cli\u003eCompatible with the Arduino GIGA Display Shield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOfficial Arduino product (ABX00063). Shipped to you from Kalmar, Sweden.\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":54952225112391,"sku":"ABX00063","price":1049.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ABX00063_00.default.jpg?v=1788981014"},{"product_id":"arduino-giga-display-shield","title":"Arduino GIGA Display Shield","description":"\u003cp\u003eThe Arduino GIGA Display Shield turns the GIGA R1 WiFi into a touch-screen device. It is a 3.97-inch, 480 x 800 pixel colour display with capacitive multi-touch, a 6-axis IMU and a digital MEMS microphone, and it plugs straight onto the GIGA R1 WiFi with no wiring. Supported by LVGL, Arduino_GigaDisplay_GFX and ArduinoGraphics, so you can build proper user interfaces, dashboards, handheld games or data visualisations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay: 3.97\" IPS TFT, 480 x 800 pixels, 16.7 million colours\u003c\/li\u003e\n\u003cli\u003eTouch: capacitive, up to 5 simultaneous touch points, gesture support\u003c\/li\u003e\n\u003cli\u003eSensors: BMI270 6-axis IMU (accelerometer + gyroscope), MP34DT06JTR digital microphone\u003c\/li\u003e\n\u003cli\u003eRGB LED, programmable\u003c\/li\u003e\n\u003cli\u003eCamera connector for Arducam modules (pass-through)\u003c\/li\u003e\n\u003cli\u003eRequires the Arduino GIGA R1 WiFi (sold separately)\u003c\/li\u003e\n\u003cli\u003eDimensions: 105.5 x 66.2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOfficial Arduino product (ASX00039). Shipped to you from Kalmar, Sweden.\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":54952228454727,"sku":"ASX00039","price":1249.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ASX00039_00.default.jpg?v=1788981026"},{"product_id":"arduino-nicla-vision","title":"Arduino Nicla Vision","description":"\u003cp\u003eThe Arduino Nicla Vision is a 22.86 x 22.86 mm board that packs a 2 MP colour camera, a dual-core STM32H747 microcontroller, Wi-Fi and Bluetooth Low Energy into a module small enough to hide inside a product or a drone frame. It runs machine-vision models on the edge with MicroPython and OpenMV, and works with Edge Impulse for training your own image classifiers and object detectors. A time-of-flight distance sensor, a 6-axis IMU and a microphone make it a complete sensing node for robotics, inspection and smart-camera projects.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontroller: STM32H747AII6, dual core (Cortex-M7 480 MHz + Cortex-M4 240 MHz)\u003c\/li\u003e\n\u003cli\u003eCamera: 2 MP colour (GC2145)\u003c\/li\u003e\n\u003cli\u003eWireless: Wi-Fi and Bluetooth Low Energy (Murata 1DX)\u003c\/li\u003e\n\u003cli\u003eSensors: VL53L1X time-of-flight distance sensor (up to 4 m), LSM6DSOX 6-axis IMU, MP34DT05 microphone\u003c\/li\u003e\n\u003cli\u003eMemory: 2 MB flash, 1 MB RAM, 16 MB external QSPI flash\u003c\/li\u003e\n\u003cli\u003eSecurity: NXP SE050C2 secure element\u003c\/li\u003e\n\u003cli\u003eUSB-C, battery charger with LiPo connector, castellated pins for soldering onto a carrier\u003c\/li\u003e\n\u003cli\u003eDimensions: 22.86 x 22.86 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOfficial Arduino Pro product (ABX00051). Shipped to you from Kalmar, Sweden.\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":54952231731527,"sku":"ABX00051","price":1949.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ABX00051_03.front.jpg?v=1788981041"},{"product_id":"arduino-nicla-voice","title":"Arduino Nicla Voice","description":"\u003cp\u003eThe Arduino Nicla Voice is a tiny, ultra-low-power board built for always-on audio and voice recognition on the edge. Its Syntiant NDP120 neural decision processor runs keyword spotting and sound-event detection at a fraction of the power a normal microcontroller would need, so it can listen for months on a small battery. The nRF52832 handles Bluetooth Low Energy, and the board also carries a 6-axis IMU and a magnetometer for motion-aware applications. Train models with Edge Impulse or use Syntiant's ready-made voice models.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeural processor: Syntiant NDP120 with onboard microphone\u003c\/li\u003e\n\u003cli\u003eMicrocontroller: Nordic nRF52832 (Cortex-M4, 64 MHz) with Bluetooth Low Energy\u003c\/li\u003e\n\u003cli\u003eSensors: BMI270 6-axis IMU, BMM150 magnetometer\u003c\/li\u003e\n\u003cli\u003eMemory: 512 KB flash, 64 KB RAM, 16 MB external flash\u003c\/li\u003e\n\u003cli\u003eUSB-C, battery charger with LiPo connector, castellated pins\u003c\/li\u003e\n\u003cli\u003eDimensions: 22.86 x 22.86 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOfficial Arduino Pro product (ABX00061). Shipped to you from Kalmar, Sweden.\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":54952234484039,"sku":"ABX00061","price":1449.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ABX00061_03.front.jpg?v=1788981051"},{"product_id":"arduino-portenta-h7-lite","title":"Arduino Portenta H7 Lite","description":"\u003cp\u003eThe Arduino Portenta H7 Lite is the industrial-grade Portenta H7 without the wireless module and the video output, at a lower price. It keeps the dual-core STM32H747 that can run Arduino, MicroPython and TensorFlow Lite at the same time, and the two 80-pin high-density connectors that carry it onto Portenta carriers and custom PCBs. A good fit for embedded products, machine control and edge computing where you already have connectivity elsewhere in the design.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontroller: STM32H747XI, dual core (Cortex-M7 480 MHz + Cortex-M4 240 MHz)\u003c\/li\u003e\n\u003cli\u003eMemory: 2 MB flash, 1 MB RAM, plus 8 MB SDRAM and 16 MB NOR flash\u003c\/li\u003e\n\u003cli\u003eSecurity: NXP SE050C2 secure element\u003c\/li\u003e\n\u003cli\u003eUSB-C with host, device and power-delivery support\u003c\/li\u003e\n\u003cli\u003e2 x 80-pin high-density connectors (compatible with Portenta carriers)\u003c\/li\u003e\n\u003cli\u003eOperating temperature -40 to +85 °C\u003c\/li\u003e\n\u003cli\u003eNo Wi-Fi\/Bluetooth and no DisplayPort over USB-C – choose the Portenta H7 if you need those\u003c\/li\u003e\n\u003cli\u003eDimensions: 66.04 x 25.4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOfficial Arduino Pro product (ABX00045). Shipped to you from Kalmar, Sweden.\u003c\/p\u003e","brand":"Arduino","offers":[{"title":"Default Title","offer_id":54952237629767,"sku":"ABX00045","price":1399.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/ABX00045_02.front.jpg?v=1788981064"},{"product_id":"seeed-studio-xiao-nrf52840","title":"Seeed Studio XIAO nRF52840","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized Bluetooth development board built on the Nordic nRF52840. Suited to wearables, battery-powered sensors and other low-power wireless projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003e11 GPIO with PWM, 6 analog inputs, UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm, components on one side for surface mounting\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino, MicroPython and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219718291783,"sku":"SEEED-102010448","price":199.0,"currency_code":"SEK","in_stock":false},{"title":"Pre-soldered headers","offer_id":55219718324551,"sku":"SEEED-102010631","price":219.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/2-102010448-seeed-studio-xiao-nrf52840-45font-logo.jpg?v=1790780756"},{"product_id":"seeed-studio-xiao-nrf52840-sense-pre-soldered-headers","title":"Seeed Studio XIAO nRF52840 Sense (pre-soldered headers)","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO nRF52840 with a motion sensor and microphone added, delivered with headers already soldered. A common choice for TinyML projects such as gesture and sound recognition.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003eOn-board 6-axis IMU (LSM6DS3TR-C) and PDM microphone\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003e11 GPIO with PWM, 6 analog inputs, UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino, MicroPython and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219718684999,"sku":"SEEED-102010632","price":339.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010632-seeed-studio-xiao-nrf52840-sense-_pre-soldered.jpg?v=1790780757"},{"product_id":"seeed-studio-xiao-nrf52840-plus","title":"Seeed Studio XIAO nRF52840 Plus","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO nRF52840 with more pins. Extra pads on the underside bring the total to 20 GPIO while the board keeps the same thumb-sized footprint.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003e20 GPIO in total, with UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino, MicroPython and CircuitPython\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219719569735,"sku":"SEEED-102010672","price":209.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010672-seeedstudio-xiao-nrf52840-plus_1.jpg?v=1790780757"},{"product_id":"seeed-studio-xiao-nrf52840-sense-plus","title":"Seeed Studio XIAO nRF52840 Sense Plus","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThe XIAO nRF52840 Sense with more pins. Motion sensor and microphone on board, and extra pads on the underside for 20 GPIO in total.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840, Arm Cortex-M4F at 64 MHz, 1 MB flash and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 Low Energy and NFC, on-board antenna\u003c\/li\u003e\n\u003cli\u003eOn-board 6-axis IMU and PDM microphone\u003c\/li\u003e\n\u003cli\u003e20 GPIO in total, with UART, I2C and SPI\u003c\/li\u003e\n\u003cli\u003e2 MB on-board QSPI flash\u003c\/li\u003e\n\u003cli\u003eUSB-C and charging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003e21 × 17.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Default Title","offer_id":55219719733575,"sku":"SEEED-102010694","price":329.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-102010694-seeedstudio-xiao-nrf52840-sense-plus_1.jpg?v=1790780758"},{"product_id":"seeed-studio-xiao-nrf54l15","title":"Seeed Studio XIAO nRF54L15","description":"\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Delivery within the EU only.\u003c\/p\u003e\u003cp\u003eThumb-sized development board built on Nordic's nRF54L15, the successor generation to the nRF52 series. Made for very low-power Bluetooth, Thread, Zigbee and Matter devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF54L15, Arm Cortex-M33 at 128 MHz with a RISC-V coprocessor\u003c\/li\u003e\n\u003cli\u003e1.5 MB non-volatile memory and 256 KB RAM\u003c\/li\u003e\n\u003cli\u003eBluetooth LE 6.0 including Channel Sounding, plus Thread, Zigbee and Matter\u003c\/li\u003e\n\u003cli\u003eOn-board antenna with connector for an external antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in debug interface over USB-C, no external programmer needed\u003c\/li\u003e\n\u003cli\u003eCharging circuit for a single-cell LiPo battery\u003c\/li\u003e\n\u003cli\u003eDeveloped with the nRF Connect SDK (Zephyr)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed Studio","offers":[{"title":"Headers not soldered","offer_id":55219719831879,"sku":"SEEED-101991421","price":199.0,"currency_code":"SEK","in_stock":false},{"title":"Pre-soldered headers","offer_id":55219719864647,"sku":"SEEED-114993696","price":219.0,"currency_code":"SEK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/4535\/2519\/files\/1-101991421-xiao-nrf54l14.jpg?v=1790780759"}],"url":"https:\/\/gadwave.com\/collections\/best-sellers.oembed?page=6","provider":"Gadwave","version":"1.0","type":"link"}